| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,130 Posts1,056,717 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#10258 03/16/2005 5:56 PM | Joined: Jun 2000 Posts: 2,773 'Bolter | | 'Bolter Joined: Jun 2000 Posts: 2,773 | If you do end up pulling the cover and pan. The fix is to tap the holes in the bearing cap so those two bolts can be removed from the front without pulling the pan.
The engine needs to be jacked to remove the pan. Place a jack under the balancer (with a block of wood) and remove the bolts through the motor mount.
Fred
52 3600
69 C-10
| | | |
Entire Thread
| 
235, 62 1/2 Ton, Pulling oil Pan?
| gtex | 03/15/2005 9:29 PM | |
Re: 235, 62 1/2 Ton, Pulling oil Pan?
| 8trackdude | 03/15/2005 9:43 PM | |
Re: 235, 62 1/2 Ton, Pulling oil Pan?
| Hotrod Lincoln | 03/15/2005 9:54 PM | |
Re: 235, 62 1/2 Ton, Pulling oil Pan?
| gtex | 03/16/2005 3:57 PM | |
Re: 235, 62 1/2 Ton, Pulling oil Pan?
| Fred T | 03/16/2005 5:56 PM | |
Re: 235, 62 1/2 Ton, Pulling oil Pan?
| 8trackdude | 03/16/2005 7:18 PM | |
Re: 235, 62 1/2 Ton, Pulling oil Pan?
| Fred T | 03/16/2005 8:58 PM | |
|
|
| |
