The Stovebolt Site Forums The Shop Area The Electrical Bay Fog Lamp Wiring

You may or may not like the following: I added a total of four lights to the front bumber of my streetrod. The first two are parking lights. They are called "Visibolts" and are yellow LED's flush mounted to a center drilled SST bumber bolt. I ran the wires through the bottom of a bumber brace/fender gasket and used black RTV to glue them to the bottom of the brace which is painted black. They are competely hidden except where they leave the bottom of the brace to enter the back of the bolt. The next two are called Trippe lights which are old timey running/fog lamps and are mounted to the bumber braces with clamps. Here I used SST sprial wrap flexible hose to run the wires in. They run from the bottom rear of the lamp buckets to a small hole I drilled in the fenders. I didn't want to drill the holes but all other fit-ups (like running them under the fenders) looked sloppy.