| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,165 Posts1,057,010 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2005 Posts: 8,983 Sir Searchalot | | Sir Searchalot Joined: May 2005 Posts: 8,983 | IMO: First, setting on back is OK. Replacing a rocker and cab corner will not tweak the 6 sided box. Floor braces, depends on if you can keep the cube/box/cab supported by replacing one at a time. Cowl panel, not sure how much cutting you are doing. If you think you will be loosing the "cube" by cutting something you should brace door openings and floor and windshield opening possibly also depending on the cowl thing. I assume you means supports not floor pan. The pan gives much strength to the cube. If you are taking out/replacing the entire pan to get at the supports, then brace. The true answer comes from a 60-66 owner who has done it. Put this post in the 60-66 forum also.
Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. - William Penn
| | |
|
|
| |
