| |
Click on image for the lowdown. 
====
| | |
7 members (GMCJammer51, 68ironhead, Rusty Rod, carbking, Jeff Ogden, Gdads51, Ridgeback),
374
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,162 Posts1,057,042 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | What I do is take the power transformer from a 12 volt Buick radio and install it. Then, I switch the heater leads on four of the tubes to make two pairs in series, and feed the 12 volts to each pair. The 6V6 I replace with a 12V6. I think you can buy 12 volt versions of all the tubes from Antique Electronics Supply. You would have to check on that. Also, I replace the vibrator with a 12 volt solid state unit.
The old Buick/Olds radios are not as popular as the truck radios and they usually can be picked up for much less. They don't have to be complete or look nice either. | | |
|
|
| |
