On three no. It is along story, but at the last minute the body guy found one hinge rusted where the pin goes through.
They had it drilled, and put a long rod through it. I can't attest to the work, as it was put together before I knew.
So, at least one door is 'origional'. The other has this mod.
I think you'll find the hinge pins at the bottom of it...
I was certain mine were ok and I just needed to master the art of 'door adjusting' down a little better...
I looked at how to better adjust every bit of those angles and planes. I finally got down on the ground and had a look at the bottom hinge with the door on the screw jack for slow, fine tuning, I could see exactly when the hinge stopped moving but the door didn't.
And it was exactly how much I couldn't adjust in the locale you're describing.
One of my pins was in 3 pieces the others not so bad.
It's the Bushings that allow the slop and they are shot and a 'piece of metal rod' isn't really gonna cut it.
