Good morning. The driver side door on our 1952 3100 is not aligned correctly. You have to slam the door to get it to stay shut and even then, the door extends out from the cab about 1/8 of an inch. I took the striker plate off to see how the door sits in the frame. The top near the upper/back part of the window seems to make contact with the cab first. The door from the handle down sticks out about 1/8 of an inch (or maybe a little more). I am assuming I need to make an adjustment at the hinge. Am I adjusting the upper hinge outward or the lower hinge inward? I've never done this before, so any insight/assistance would be appreciated.
Here is a picture of the side of the truck.
