| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,184 Posts1,057,195 Members48,465 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2007 Posts: 434 Shop Shark | | Shop Shark Joined: Feb 2007 Posts: 434 | Get a good flashlight open the hood and take a close look from the inside. There are two bottom and two top metal tabs. If you push both in at the same time you can push out that top/bottom side then same with the other.
The lens and bulb housing pops out the front of the hood. The bulb and bulb holder pop out towards the rear of the truck.
Two rivets hold the lens to the bulb housing. Drill those out and set new ones to change lens.
As far as getting both tabs pushed in at the same time, the service manual has plans for making you own tool to hold both in.
You may want to order a service manual for you new truck. Good luck with it they are pretty cool.
R-Bo
1959 Apache 1/2 ton Big Window, Short bed Fleetside (under reconstruction)
1966 GMC 305V6 in the family
| | |
|
|
| |
