Stovebolt.com

Roll Call?

Posted By: Dave51Chev

Roll Call? - Sat Oct 13 2012 09:41 PM

I thought since this is one of the newer Side Lots, we could get bearing on how many are here.

Post a comment if you're a Rocky Mountain Bolter!
Posted By: FriedGreenTmater

Re: Roll Call? - Sat Oct 13 2012 09:54 PM

YooHoo! From Colorado Springs.
Posted By: Jimmie D

Re: Roll Call? - Sun Oct 14 2012 04:05 AM

Hello, from Grand Junction
Posted By: scrambler45

Re: Roll Call? - Sun Oct 14 2012 09:22 PM

Hi from Casper, Wyoming!
Posted By: MisterR

Re: Roll Call? - Mon Oct 15 2012 08:22 AM

Greetings from Nederland, Colorado.
Posted By: Mildman

Re: Roll Call? - Mon Oct 15 2012 08:57 PM

Hello all from Great Falls MT
Posted By: delky

Re: Roll Call? - Mon Oct 15 2012 11:29 PM

Howdy from Riverton, WY
Posted By: 55 1st suburban

Re: Roll Call? - Tue Oct 16 2012 06:55 AM

Rapid City, SD
Posted By: hickey

Re: Roll Call? - Wed Oct 17 2012 08:36 PM

Hi Bruce .... Did you ever sell your 54 Chevy COE?
Posted By: J M

Re: Roll Call? - Fri Oct 19 2012 01:37 AM

Hi from Gunnison Colorado.
Jim
Posted By: lilblue52

Re: Roll Call? - Fri Oct 19 2012 01:28 PM

Happy to be here in Logan, Utah.
Posted By: hankrags

Re: Roll Call? - Sat Oct 20 2012 01:03 AM

We are all here cause we ain't all there!
hank
Posted By: Chooglin

Re: Roll Call? - Sat Oct 20 2012 12:49 PM

Holla from Missoula MT
Posted By: pope

Re: Roll Call? - Sun Oct 21 2012 09:49 PM

Greetings from Belgrade MT!
Posted By: r&g53

Re: Roll Call? - Fri Oct 26 2012 10:55 AM

Another new one from Colorado Springs, Co, just got the truck from a ranch south of Rocky Ford, Co and starting to work on it.....
Posted By: oldblue48

Re: Roll Call? - Sat Oct 27 2012 07:38 AM

Hey there, from Littleton, Colorado
48 5 window
52 5 window driven every day
52 panel
53 suburban
Yep, its a disease!

Posted By: Al_Lake

Re: Roll Call? - Tue Oct 30 2012 07:06 PM

Hello from Missoula MT
Posted By: drew_vigil

Re: Roll Call? - Tue Oct 30 2012 10:38 PM

Drew Vigil from the NitroBillies in Denver Colorado!
Posted By: Dickson

Re: Roll Call? - Wed Oct 31 2012 10:20 AM

New Rocky Mtn Bolter: Dickson in Denver.

My buddy and I are restoring a '51 GMC 1/2 ton pickup.

Need a good engine, trans, and rear. Anyone have an option for us?

Thanks! Dickson/ dickson746@comcast.net
Posted By: FREAKY49

Re: Roll Call? - Tue Nov 13 2012 10:46 AM

Hello from Albuquerque NM!
Posted By: Jed

Re: Roll Call? - Sat Nov 17 2012 01:15 PM

Posting from the Brighton, CO area, approximately 30 miles N.E. of Denver
Posted By: 66birdman

Re: Roll Call? - Fri Nov 23 2012 03:02 PM

SW Idaho
Posted By: pope

Re: Roll Call? - Fri Nov 23 2012 07:32 PM

Welcome 66birdman!
Posted By: DrewGoldsmith

Re: Roll Call? - Sat Dec 01 2012 09:51 PM

Hello from Breckenridge Colorado. 51 Coe work truck
Posted By: tk261

Re: Roll Call? - Thu Dec 06 2012 02:06 PM

Hello from the Bailey, CO area--south and west of Denver metro.
(1953 Chev. 3/4 T.)
Posted By: hd4unm

Re: Roll Call? - Fri Dec 07 2012 12:43 PM

New guy here from Evergreen, CO
'59 3200
If I tried to run over anyone around here, I apologize now. Can't help that it's fast and fun.
Posted By: Brad Allen

Re: Roll Call? - Sun Dec 09 2012 02:29 PM

Hey! Salt Lake City here.
Posted By: lostmy47

Re: Roll Call? - Thu Dec 13 2012 03:09 PM

Hi I'm Jeremy.
I just drove my 1950 1 ton here from San Jose, CA.
I'm in Denver, and met Chris and his truck Brutus about a month ago.

Nice to meet you.

Soooo when are we going to have a meet up?
Posted By: Lostinidaho

Re: Roll Call? - Wed Dec 19 2012 04:32 PM

Hi from a newbie in Rexburg ID

LostinIdaho
Posted By: Dave51Chev

Re: Roll Call? - Thu Dec 20 2012 12:11 AM

Golly Gee! We got a lot of people here!
Howdy to everyone!
Posted By: ergbert

Re: Roll Call? - Sun Dec 23 2012 12:20 AM

Hello from Clifton CO
Posted By: scootsbs

Re: Roll Call? - Sun Dec 23 2012 11:15 AM

Scoot from SLC Ut. Here
Posted By: dynosaurus

Re: Roll Call? - Tue Dec 25 2012 10:12 PM

Add one more to the list in Colorado Springs...
Eric
Posted By: PapaJ

Re: Roll Call? - Wed Dec 26 2012 06:36 PM

My address is in Security Co. but being a road driver I could be anywhere at any time on any day.
Posted By: pope

Re: Roll Call? - Mon Dec 31 2012 07:06 PM

HAPPY NEW YEAR TO ALL OF YOU BOLTERS!
Posted By: slick51

Re: Roll Call? - Sat Jan 05 2013 11:38 PM

hi from placitas nm - 65 C10 project
Posted By: Rix42

Re: Roll Call? - Wed Jan 09 2013 04:04 PM

Hi I am Rick. I live in Tucson AZ and have a 1942 1 1/2 ton military G506.
Posted By: Chaduro

Re: Roll Call? - Sun Jan 13 2013 10:35 AM

Howdy from Peoria, Arizona!
Posted By: mummdogg

Re: Roll Call? - Sun Jan 13 2013 04:56 PM

Pine Haven, WY
Posted By: lugnut123

Re: Roll Call? - Tue Jan 29 2013 03:35 PM

Hello from nw new mexico. I had a 41 pickup but my daughter wanted it more than I did. But I got a 39 pickup that neeeds work an a 55 2nd that I put a diesel in. So high every body. lug
Posted By: Colotow

Re: Roll Call? - Tue Jan 29 2013 05:41 PM

Tooele, Ut, a bit west of Salt Lake. had one 65 short stepside, it was a bit of a beater but it was a fun little rig, it was my daily driver for years. Got another 65, originally bought it as a parts donor, got just the cab now, thinking about putting it on a later 4x4 frame.
Posted By: pope

Re: Roll Call? - Tue Jan 29 2013 07:55 PM

Welcome!
Posted By: mudfoot

Re: Roll Call? - Thu Jan 31 2013 02:38 PM

I'm here in Wheat Ridge, CO. Just got my truck October 2012. It needs plenty of work but I am happy to give it a try.
Posted By: duckfoot75

Re: Roll Call? - Thu Jan 31 2013 05:34 PM

Hi all from Cortez, Colorado
David
Posted By: Lightholder's Dad

Re: Roll Call? - Sat Feb 09 2013 01:44 PM

Reporting in from Arizona. I have my '51 Chevy half ton at my house in Mesa and my '50 Chevy COE and '42 Chevy half ton at my shop south of Prescott in the Groom Creek area,
Kent
Posted By: faynelong

Re: Roll Call? - Sun Feb 10 2013 05:05 PM

hi fayne from florence co just working on my 47 ad getting a rebuilt 235 so i can get it up to speed again
Posted By: goneagain

Re: Roll Call? - Wed Feb 13 2013 03:55 PM

Hello there from North Idaho. wave
Posted By: Miner54

Re: Roll Call? - Mon Feb 18 2013 04:50 PM

Hello from Utah!
Posted By: Gary Fantasky

Re: Roll Call? - Wed Feb 20 2013 08:29 PM

Hi from Littlton CO. Just purchased a 51 1/2 in Jan and swapped the 216 engine for a 57 235. A tight fit on the fan. Runs sweet.
Posted By: feierabend

Re: Roll Call? - Fri Feb 22 2013 09:17 AM

Buenos Dias.

Kurt Feierabend, 1950 Chevy 3100.

Corrales, NM
Posted By: duckfoot75

Re: Roll Call? - Mon Feb 25 2013 06:49 PM

Just picked up a 65 GMC short step with 350 setup and working on a buying 66 Chevy that will be final project..fun times
Posted By: bigtim44

Re: Roll Call? - Tue Mar 05 2013 12:46 AM

Tim here, from Glenwood Springs CO.
Currently have whats in my signature.
Posted By: W_Reeve53

Re: Roll Call? - Wed Mar 06 2013 09:58 PM

Wow, lots of Colorado people here, Wes in Mesa Colorado
Posted By: NMBrian

Re: Roll Call? - Sun Mar 10 2013 09:05 AM

Big group. I have a '50 1/2 ton chevy daily driver in Albuquerque.
Posted By: duckfoot75

Re: Roll Call? - Mon Mar 11 2013 10:00 PM

Ended up with 2 66 Chevys...short and long bed steps...
Posted By: RJ

Re: Roll Call? - Fri Mar 15 2013 11:01 AM

Hello, from eastern,Co(crowley)
Posted By: Scott60

Re: Roll Call? - Tue Mar 26 2013 06:35 PM

Hi from Boulder. Have a 53 1/2 ton.
Posted By: Tomb23

Re: Roll Call? - Wed Apr 03 2013 02:47 PM

Eastern Oregon/56 GMC
Posted By: IdahoFeller

Re: Roll Call? - Thu Apr 04 2013 12:11 PM

Idaho falls here 1958 Chevy Apache 36. Welcome and good to have a fellow SE Idahoan here
Posted By: Wally / Montana

Re: Roll Call? - Sat Apr 06 2013 06:16 PM

Missoula, MT. I never would have had my 21 years of daily driving without the experts on the Stovebolt Page answering all my stupid questions. Thanks, guys!
Posted By: pickuptruck

Re: Roll Call? - Tue Apr 09 2013 08:57 PM

Albuquerque,NM- Been driving my 56 stepside regularly for 20 years now.
Posted By: Going 65

Re: Roll Call? - Wed Apr 17 2013 03:51 PM

Greetings from Larkspur, Colorado.
48 Chevy pickup!
Posted By: 52TFletch

Re: Roll Call? - Fri Apr 19 2013 05:05 PM

Hello hello!!

I'm in Denver, CO in the heart of it.

Tim
Posted By: 52TFletch

Re: Roll Call? - Fri Apr 19 2013 05:07 PM

Hey there.
I got my 52 chevy 5-window pu in August of last year. Mine also needs plenty of work.
Posted By: 52TFletch

Re: Roll Call? - Fri Apr 19 2013 05:12 PM

Hey Drew,

I'm also in Denver. Maybe sometime I can steal some time from you and chat trucks!

Tim
Posted By: JohnWard

Re: Roll Call? - Sun Apr 21 2013 10:41 AM

Hello from Golden Colorado. I am a pretty new Stovebolter but can say I have learned a lot about my 49 panel and received a lot of good help from the really great people that make up Stovebolt. Thank you all!
Posted By: tjscj7s

Re: Roll Call? - Sun Apr 28 2013 10:09 PM

New to Stovebolts as of about 3:00pm today. 1949 3100 five window in Broomfield, Colorado.
Posted By: Gary Fantasky

Re: Roll Call? - Wed May 01 2013 03:11 PM

Hi from Littleton CO. There seems to be quite a few of us in the Denver area. I propose that we pick a place on a Saturday and meet. Any interest? There is a Sonic on Ken Caryl just east of C-470 that I have seen classic cars gather.
Posted By: chromesnot

Re: Roll Call? - Wed May 15 2013 02:50 PM

Hello from colorado springs. Just got my 48 1.5 ton always could use a hand or info.
Posted By: chromesnot

Re: Roll Call? - Wed May 15 2013 03:50 PM

Hey papa j we need to get together looks like you have some of the stuff I'm leaving looking into. I got a 48 1.5 ton. E mail or pm me. read.dustin@gmail.com
Posted By: Hot Rod John

Re: Roll Call? - Sun May 26 2013 06:57 PM

Rocky Mountain Bolters? ohwell I guess I need to venture away from the 60-66 forum once every 3 or so years wave

Long time poster, new to this forum.

Brighton Colorado, North of Denver.

Check out my signature line for my build thread.
Posted By: rbs56

Re: Roll Call? - Tue Jun 04 2013 09:44 PM

Chadron Ne, 55.2 GMC purchased in 1975 for $150 been driving it ever since
Posted By: 5150scott

Re: Roll Call? - Fri Jun 28 2013 06:06 PM

Brighton,CO here!
Posted By: 801curt

Re: Roll Call? - Tue Jul 09 2013 03:01 PM

Downtown Salt Lake City!
Posted By: 61bolter

Re: Roll Call? - Mon Jul 15 2013 11:24 AM

Larry from Eloy, AZ.
Posted By: wyobill

Re: Roll Call? - Tue Jul 23 2013 11:17 PM

Hi, Bill in Casper, WY

"49" Chevy 3600
Posted By: pope

Re: Roll Call? - Wed Jul 24 2013 06:32 PM

How are things in Casper? I lived there for a few years before ending up in MT.
Posted By: 53moneypit

Re: Roll Call? - Fri Jul 26 2013 02:25 PM

Officially I am still High Plains Chapter Inliners member even tho' to my chagrin I now must admit to living in Missory, er, ah Missouri. Well my heart still resides in CO and always will until my tired old arse gets back there.
Posted By: wyobill

Re: Roll Call? - Sun Jul 28 2013 12:16 AM

Things are alright. In Casper,still windy as usual.
Posted By: LarkspurApache

Re: Roll Call? - Thu Aug 15 2013 11:55 AM

Livein the Life in Larkspur, CO

1961 Apache 1/2 ton

Almost finished with total off the frame resto.
Posted By: awk

Re: Roll Call? - Fri Aug 16 2013 04:22 PM

I'm in Westminster, CO. 54 3100, not restored or in pristine condition, but lots of "patina" grin
Posted By: Goob

Re: Roll Call? - Sun Aug 25 2013 04:07 PM

Wow those are some nice trucks...may have to pick your brain or swing by for a look-see in the future
Posted By: pope

Re: Roll Call? - Sun Aug 25 2013 09:02 PM

Welcome to all of the new members!
Posted By: DesertSage

Re: Roll Call? - Mon Aug 26 2013 09:57 PM

Hello from Clarkdale Arizona!
Posted By: X-Farmboy

Re: Roll Call? - Sun Sep 15 2013 11:27 AM

Durango Colorado here, with a '47.1 project I've been working on for close to a year. It's been in the family for over 50 years. It should be on the road within a week, after a front-to-rear mechanical upgrade. What an adventure!
Posted By: pipeliner78

Re: Roll Call? - Tue Oct 29 2013 05:01 AM

Hello from Kaysville, UT
Posted By: Guillermo

Re: Roll Call? - Sun Nov 24 2013 06:03 AM

Hello from Pueblo,Colorado.
Posted By: draciel882

Re: Roll Call? - Thu Dec 12 2013 09:43 PM

Hey from Lethbridge, Alberta, Canada. I believe I'm in the right place here...
Posted By: pope

Re: Roll Call? - Fri Dec 13 2013 01:24 AM

You share the Rocky Mountains and we'll be happy to have you here, so welcome!
Posted By: Marko2727

Re: Roll Call? - Sat Dec 21 2013 09:02 PM

Hello from Littleton Colorado. 1947 3600 purchased 12-15-13 and stoked!
Posted By: jeff3600

Re: Roll Call? - Sat Feb 08 2014 02:22 AM

Greetings from Scottsdale, Arizona
Posted By: Hot Rod John

Re: Roll Call? - Sat Feb 08 2014 02:43 AM

1965 C10 SWB Step.... Old school hot roddin' from northern Adams County Colorado.. home of "Oil Field Trash" and the "Fracking Revolution" that has resulted from the "Drill Baby Drill" campaign yahoo dang
Posted By: Steve_H

Re: Roll Call? - Thu Apr 10 2014 05:45 AM

Wow! I almost missed this one. Too much time lurking in the Shop area. Hello from Ogden Ut. 52 1/2 ton running, driving and proud to be in primer. Yep the rattle can stuff. Hey! It's OK I got the rust off, Now I can make it purdy. Lots from Utah, nice to see that others have the same obsession.
Posted By: tdplbg

Re: Roll Call? - Sun Apr 20 2014 02:13 PM

Casper, Wyoming, 1950 panel
Posted By: old49joe

Re: Roll Call? - Fri May 02 2014 10:05 PM

Shelley, Idaho 1949 one ton dually. Currently in pieces all over the garage and at the body shop. Can't wait to drive it.
Posted By: sky nighthawk

Re: Roll Call? - Wed May 07 2014 11:46 PM

Hi from Dixon NM, working on a 1941 GMC school bus
Posted By: model70

Re: Roll Call? - Tue May 13 2014 10:28 PM

Hello from Delta, Utah
Posted By: vetteduck

Re: Roll Call? - Fri May 16 2014 05:00 PM

Hi From Fort Collins.
Posted By: awk

Re: Roll Call? - Mon May 19 2014 02:37 AM

I'm here from Westminster, CO.

Anyone have any parts for a 54 Airflow heater? I need a fan and the 12v motor.

awk
Posted By: coal

Re: Roll Call? - Tue May 27 2014 03:03 PM

Hi from absarokee mt just resurrected a 58 Viking 60
Posted By: makindust

Re: Roll Call? - Fri Jul 04 2014 05:16 AM

Just Joined, From Kaysville, UT
1966 GMC w/351 big block V6
(basket case)

Kurt
Posted By: Dodgecummins

Re: Roll Call? - Sun Jul 13 2014 04:32 AM

New guy,
San Tan valley, Arizona
Posted By: Ssrjim

Re: Roll Call? - Thu Jul 31 2014 07:09 PM

Hello from Phoenix, Arizona.
Posted By: Grover

Re: Roll Call? - Mon Aug 25 2014 12:49 AM

Just joined up. Northern New Mexico.
Posted By: scottss60

Re: Roll Call? - Mon Aug 25 2014 01:12 AM

Hey from Denver!
Posted By: CmdrGeo

Re: Roll Call? - Sun Aug 31 2014 11:50 PM

Checking in from Phoenix, AZ.
Posted By: CmdrGeo

Re: Roll Call? - Tue Sep 02 2014 05:23 AM

Checking in from Phoenix, AZ
Posted By: Dodgecummins

Re: Roll Call? - Tue Sep 02 2014 10:42 PM

All of from AZ that leave close to town need to meet up at the car show in Scottsdale or Mesa one of these weeks with the trucks... Wait, mine is far from road ready.
Posted By: grgg

Re: Roll Call? - Sat Sep 20 2014 06:45 PM

Howdy , from Prescott Az. Burbs & trailers
Posted By: 66 Green Machine

Re: Roll Call? - Wed Oct 01 2014 03:55 AM

Colorado Springs (Fort Carson), CO
Posted By: Poppa Dave

Re: Roll Call? - Sun Oct 12 2014 04:54 AM

Howdy! Newbie to the group from Twin Falls, Idaho
Dave
Posted By: Idaho53

Re: Roll Call? - Wed Oct 15 2014 03:33 PM

New Member from Boise Idaho....
Posted By: COWayne

Re: Roll Call? - Wed Oct 22 2014 03:01 PM

Hi from Colorado Springs, CO.
Posted By: grgg

Re: Roll Call? - Sat Oct 25 2014 05:15 PM

checking in here in awesome Prescott AZ
Posted By: Shercoman

Re: Roll Call? - Fri Nov 07 2014 05:02 AM

Hello from Pine,Colorado.
Posted By: KimD

Re: Roll Call? - Fri Nov 07 2014 05:43 PM

Hope I qualify - on the East side of the Rockies in Calgary Alberta. Proud owner since April 2014 of a restored Canadian built 1958 Apache Fleetside.
Posted By: Steve_H

Re: Roll Call? - Mon Nov 10 2014 09:26 PM

Here in Utah smile
Posted By: dirtball

Re: Roll Call? - Mon Dec 08 2014 08:59 PM

here in Bozeman, MT
Posted By: pope

Re: Roll Call? - Thu Dec 11 2014 12:52 AM

Finally! Someone else from MT!
Posted By: sandollar43

Re: Roll Call? - Sat Dec 20 2014 05:09 PM

Hi from Tempe, AZ. Much to learn. Don't know enough
Posted By: delky

Re: Roll Call? - Thu Dec 25 2014 05:33 AM

Merry Christmas to ALL of you ROCKY MTN BOLTERS !!!!!!
delky dave
Posted By: LBuck

Re: Roll Call? - Thu Jan 01 2015 05:29 PM

Hi from Salt Lake City UT.
Posted By: Fox

Re: Roll Call? - Mon Jan 26 2015 06:45 AM

Breton, Alberta, Canada!
Posted By: Tipidweller

Re: Roll Call? - Thu Feb 26 2015 03:16 AM

Arminto, Wy. Daily Driven 1966 2.5 ton.
Posted By: D@C

Re: Roll Call? - Wed Mar 18 2015 03:01 AM

Greetings from Flagstaff, Arizona
The Grand Canyon State

51 Chevy 1/2 pu
Five window

David
Posted By: Chris K

Re: Roll Call? - Mon Apr 20 2015 03:16 AM

Chris from Gunnison, Colorado. Using my 51 Chevy 2 ton on most every project we build.
Posted By: J M

Re: Roll Call? - Mon Apr 20 2015 06:17 AM

Hi Chris
Welcome to the Stovebolt. I am from Gunnison as well and have seen your truck. It looked good in the car show a few years ago. I also have a 51 2 ton that we used to have our wrecker on. It is not as nice as yours. This is a fun site with lots of information. Glad you found it.
Jim McDermott
Posted By: Chris K

Re: Roll Call? - Mon Apr 20 2015 06:08 PM

Jim,
I remember talking to you at the car show. I would love to talk with you about the plans for this year if you have a few minutes. The cell number is on the side of any of my equipment and trucks. They won't allow me to send personal messages yet.
Chris
Posted By: pwid

Re: Roll Call? - Sat Apr 25 2015 04:45 AM

Hi out there, Pete Widman from Thermopolis Wy. Just got a 1945 AFR 522 coe. Not big into gmc but love this one.
Posted By: delky

Re: Roll Call? - Sat Apr 25 2015 10:39 PM

pwid
welcome to the Bolt.
delky dave in wyo
Posted By: Danthemanmj23

Re: Roll Call? - Tue May 26 2015 05:14 AM

Danny from Layton, Utah.

Registered on the site a few years back but finally dragged my 55.1 5 window out here from Colorado last week. Excited to get my hands dirty.
Posted By: Zesty

Re: Roll Call? - Fri Jul 17 2015 07:35 AM

Montana here...
Posted By: tailhole

Re: Roll Call? - Mon Jul 20 2015 04:43 PM

Denver, CO
Posted By: COWayne

Re: Roll Call? - Tue Jul 21 2015 04:35 AM

Anyone in the Colorado Springs area interested in getting together some time? Anyone going to the Old Colorado City Good Times Show in August?
Posted By: Merckx

Re: Roll Call? - Thu Aug 06 2015 04:41 PM

Fruita, CO
Posted By: 1960 DNA

Re: Roll Call? - Sun Aug 09 2015 11:18 PM

Vernal, UT
Got myself a clean 60 GMC that has been worked on, upgraded. Looking to do a lot with it and I am looking to some ideas and time savers.
Posted By: Rugo

Re: Roll Call? - Fri Aug 28 2015 07:41 PM

Hello from Gilbert AZ. Long time member. Been a long time since I have posted.

Rugo
Posted By: a6row

Re: Roll Call? - Tue Oct 06 2015 09:12 PM

I didn't see any other Nevadans here but there isn't a Great Basin Bolters Group. Nevada was once Western Utah Territory. That beats Eastern California. If I get to choose I'd rather be here. I see folks from a lot of places I've been. So Hello from Northern Nevada.
Posted By: RodTheWrench

Re: Roll Call? - Wed Oct 07 2015 04:48 AM

American Fork, Utah here.

I own an auto shop, have always loved old Chevy trucks and just drug one home - 1953 3100 Deluxe Cab 4-speed. No motor but I ran across a complete 235 that I couldn't pass up before I even had the truck. And so it begins...
Posted By: Rusty Rod

Re: Roll Call? - Mon Oct 12 2015 12:10 AM

LOVE Land, Colorado.
Posted By: Steve_H

Re: Roll Call? - Sat Oct 17 2015 07:30 PM

Ogden Utah. Lots of trucks are still running around. Some in my neighborhood, most will honk and wave as they go by. Nice. Found a sort of roller, with a 235, 4 speed and a torque tube rear that I need. Tough to move, the frame was cut just after the E brake pivots. "Just get it out of the yard" price. So it is now in front of the garage waiting for me to pull off what I want. Just might be the best parts deal I have ever made.
Posted By: Rusty Rod

Re: Roll Call? - Fri Oct 30 2015 05:07 PM

I spotted a nice looking blue 58-59 Fleetside in Loveland, Co.

There is a 68-72 Chevy Longbed pickup parked next to two 'stangs about 200 yards from my house to... I have been stalking the owner for a couple weeks now.
Posted By: Mose1

Re: Roll Call? - Sat Oct 31 2015 09:58 PM

Hey, Mark in Castle Rock, Colorado checking in.
Posted By: CO Stovebolt

Re: Roll Call? - Sat Dec 12 2015 06:54 AM

Hello from Highlands Ranch, CO. Ready to start "Colorful" tomorrow. 13 months of work on this farm find 59' 3100. Pulled her out a field near Trinidad, CO and she's ready to come back to life. She turns over and has not run for 7 years. All systems rebuilt and ready to go.
Posted By: faynelong

Re: Roll Call? - Tue Dec 22 2015 07:43 PM

hi fayne from florence co got my 47 up and runnung needs a little body work but it is still a work truck so i may just keep it the way it is and drive the snot out of it i get lots of waves when i drive it merry x mas to everyone
Posted By: COWayne

Re: Roll Call? - Fri Jan 01 2016 05:51 AM

Looks like a lot of Colorado truck guys here.
Posted By: cmachad2

Re: Roll Call? - Tue Jan 05 2016 05:57 AM

Boise, Idaho!
Posted By: Idaho53

Re: Roll Call? - Mon Feb 01 2016 07:37 AM

welcome cmachad2! im out in Meridian, spending my free time on a 53 3100 five window. Its a daily driver that my daughter uses to commute to school.
Mostly original, early american rust body style.
Posted By: Mark Minor

Re: Roll Call? - Mon Feb 08 2016 06:13 AM

Here in Magna, Utah.
Posted By: dodoc80

Re: Roll Call? - Tue Feb 09 2016 05:28 AM

Hey, good to hear there are a couple other Idaho folks on here. I'm down in Central Idaho, near Burley.

Idaho53, and cmachad2, I get out to Meridian once in a while with some family there. Maybe I'll see you running around one of these days.
Posted By: Weaselkeeper

Re: Roll Call? - Sun Feb 14 2016 05:26 AM

Meridian Idaho

Washed the '50 and drove "Jimmy" to the pub today.
Posted By: Jayson52

Re: Roll Call? - Thu Apr 14 2016 07:24 PM

Hello from east Idaho, one of the boxes I would like to check off soon is taking the truck through Yellowstone on a slow ride with the wife. Has anyone else completed this trip?
Posted By: delky

Re: Roll Call? - Fri Apr 15 2016 02:47 AM

Jayson52
Jan and I have been contemplating a tour thru Yellowstone for years in our 57 3100. Just need to finish the frame up -- maybe in 2017 ! Should be a very fun tour!
delky dave in WYO
Posted By: Jayson52

Re: Roll Call? - Mon May 09 2016 11:54 PM

Originally Posted by delky
Jayson52
Jan and I have been contemplating a tour thru Yellowstone for years in our 57 3100. Just need to finish the frame up -- maybe in 2017 ! Should be a very fun tour!
delky dave in WYO


I understand.... I am still trying to decide which direction I want to go, do I do a frame up or just make it a nice daily driver. Either way I am looking forward to the trip one day.
Posted By: Rusty Rod

Re: Roll Call? - Sat May 28 2016 04:51 PM

Is anyone considering going to the Stovebolt Reunion in KC this September?
Posted By: minerwelder

Re: Roll Call? - Tue Jun 21 2016 06:49 AM

South Sweetwater county Wyoming here
Posted By: Rusty Rod

Re: Roll Call? - Thu Jun 23 2016 04:01 AM

Welcome... what are you working on?
Posted By: Marko2727

Re: Roll Call? - Thu Jul 21 2016 04:22 AM

Hey RR- I've got a 47' 3600 AD (that started all of this nonsense), which led to finding 2 49' 3100's that were basket cases. HAD to have them too.......
Posted By: Rusty Rod

Re: Roll Call? - Fri Jul 22 2016 03:46 AM

Marko, Mrs Rod only allows me to have two projects at a time. I "inherited" a 38 Plymouth Coupe from my father. He put in a ZZ502 Chevy engine... I don't have room for either of my projects now.. so my Binder sits in the Car Hauler.
Posted By: Marko2727

Re: Roll Call? - Tue Aug 02 2016 03:36 AM

Putting the bed on one of the 49's today. Was going great until it hit 99 degrees here in Denver. Maybe tomorrow I'll get to mount rear fenders for the first time. The patina is looking really good.
Posted By: minerwelder

Re: Roll Call? - Thu Aug 25 2016 11:34 PM

Just got a 1948 3600, needs brakes fuel tank and much more.
Posted By: Swtps51

Re: Roll Call? - Fri Aug 26 2016 04:39 AM

Just joined on, hello from denver co.
Posted By: Rusty Rod

Re: Roll Call? - Fri Aug 26 2016 05:05 PM

Welcome aboard.
Posted By: Marko2727

Re: Roll Call? - Sun Sep 04 2016 04:24 PM

Welcome from Littleton.
Posted By: Guillermo

Re: Roll Call? - Sat Sep 17 2016 06:09 AM

Pueblo, Colorado!!
Posted By: Rusty Rod

Re: Roll Call? - Thu Sep 29 2016 05:07 AM

Welcome, from Loveland.
Posted By: Kregus

Re: Roll Call? - Tue Oct 18 2016 03:05 AM

Howdy from Lakewood CO.
Posted By: NoJunker

Re: Roll Call? - Tue Oct 18 2016 05:05 AM

Just brought my 51 GMC 3/4 ton home last weekend. Lot of cleaning before I start the mechanicals. In Colorado Springs.
Posted By: tko

Re: Roll Call? - Sat Oct 22 2016 08:30 PM

Rapid city sd
Posted By: dbwr

Re: Roll Call? - Thu Nov 24 2016 04:22 PM

Dave - Wheat Ridge
Posted By: Rusty Rod

Re: Roll Call? - Mon Dec 05 2016 02:43 PM

Welcome... from Loveland.
Posted By: 41-327

Re: Roll Call? - Tue Dec 13 2016 06:23 AM

Hello from Boise, ID
Posted By: Murphy196

Re: Roll Call? - Fri Dec 16 2016 05:29 AM

I'm in Montrose and looking for someone to talk trucks with.
Posted By: Murphy196

Re: Roll Call? - Sat Dec 24 2016 06:18 AM

I have a '51 Chevy with the trans and rear end... I might be willing to part with them but I am also looking to put my body on a different frame can you help?
Kevin in Montrose
Posted By: 49 3100

Re: Roll Call? - Sun Jan 01 2017 08:53 PM

Guess I am a member, moved to Taos NM in Oct 2016. Bought a 49 3100 SB with a 54 235 Engine..Going to have some fun...Bill
Posted By: james1961

Re: Roll Call? - Tue Jan 10 2017 12:03 AM

Hello from Aurora, CO. 1961 half ton, 235. Mostly original.
Posted By: 49 3100

Roll Call? - Tue Jan 10 2017 06:30 PM

Hi--just moved to Taos NM--need to get my 1954 235 rebuilt--any ideas? Bill
Posted By: 49 3100

Roll Call? - Tue Jan 10 2017 09:47 PM

Hi--Moved to Taos in October 2016--got a 49-3100 with a 54 235 engine--needs rebuild--Know anyone Honest and Fair in Albq> that could do it Thanks Bill
Posted By: Houdini

Re: Roll Call? - Mon Jan 16 2017 03:56 PM

Houdini from SW Denver... 1949 Thriftmaster 1 Ton...
Posted By: 49 3100

Re: Roll Call? - Sun Feb 19 2017 01:38 PM

Good Morning from Taos NM. No skiing today-putting new interior parts in, and going for a quieter ride. My 49 runs much better now that we have the correct intake/exhaust manifolds and rebuilt Rochester carb. It has a 54 235, but still had the 216 manifolds.
Posted By: '50@7703'

Re: Roll Call? - Mon Mar 06 2017 08:53 AM

Hello from Gunnison, CO.
Posted By: lugnut123

Re: Roll Call? - Tue Apr 04 2017 05:03 AM

hi from NW NM
Posted By: 49 3100

Re: Roll Call? - Fri May 05 2017 02:49 PM

Hi hear there is a swap meet in New Mexico in Las Lunas? Do you know when and where? Thanks Bill
Posted By: Fort Knox

Re: Roll Call? - Mon May 08 2017 08:52 PM

Checking in, long time 'bolter and page member. Recently moved to the Flathead Valley in MT.

Kyle
Posted By: Harley503

Re: Roll Call? - Tue May 23 2017 02:36 PM

Howdy from Salt Lake City Utah
Alan
Posted By: G.M. Sea

Re: Roll Call? - Thu May 25 2017 05:03 PM

Howdy from Calgary, Alberta in the Dominion of Canada.

Anyone from around these parts ever get a Bolt-together for drives? I see some around here every once in a while, always thought it would be fun to have a little convoy somewhere.

Can't let the bike guys being the only ones!
Posted By: Rusty Rod

Re: Roll Call? - Sat May 27 2017 09:50 PM

Welcome Sean. I am pretty sure there is a Canadian group, but they may be over near the west coast?

Rusty Rod
Posted By: G.M. Sea

Re: Roll Call? - Sun May 28 2017 10:10 PM

Thanks Rusty. West coast is a little too far for the ol' gearbox, haha. Old farm trucks and highways with original gearing just don't get along! I see other AD trucks around here every once in a while and gaze longingly at them, I am sure I will connect with some soon.
Posted By: TPR57C

Re: Roll Call? - Mon May 29 2017 10:47 AM

Watch out for Leo 53 panel is on the road pm him and you might meet up
Posted By: G.M. Sea

Re: Roll Call? - Wed May 31 2017 04:22 AM

Thanks TPR! The only user matching that I can find in the list is '53 Panel' out of Ontario. Is that the chap you were referring to?
Posted By: TPR57C

Re: Roll Call? - Sun Jun 04 2017 11:33 AM

Yes that's him he has been out your way
Posted By: VintageMontana

Re: Roll Call? - Sat Dec 02 2017 10:08 PM

Eric - Missoula, MT
Posted By: Rusty Rod

Re: Roll Call? - Sun Dec 03 2017 02:48 AM

Welcome to your quiet space Eric.
Posted By: delky

Re: Roll Call? - Sat Dec 23 2017 03:13 PM

to all of you Rocky Mountain Bolters---Merry Christmas and Prosperous New Year!!
delky in WY
Posted By: Rugo

Re: Roll Call? - Sun Dec 24 2017 10:38 AM

Thank you delky. Merry Christmas and a Prosperous New Year, to you as well.


Rugo
Posted By: delky

Re: Roll Call? - Mon Jan 01 2018 03:52 AM

Rugo & all Rocky Mtn Bolters-----A Prosperous New Year to all of you from Wyoming!
Maybe we can get some chatter going & give Rusty Rod, our moderator something to do next year!!!

delky
Posted By: Tophat

Re: Roll Call? - Fri Feb 09 2018 04:04 AM

Just got here.
Got a 1950 4400 cab n chassis 3 weeks ago running, driving and e-brake stopping.
Got it all torn down to roller with cab blasted and heading to get new Floor and cab corners then off to the body shop to fix the dents and paint in the meantime chassis will be torn down for powder coat.
Will be building a custom (I hope) flat bed
This is first stove bolt probably won’t be the last though.
Any San Tan Valley AZ bolters I’ll need advice SOON. 🎩
Posted By: Achipmunk

Re: Roll Call? - Sat Feb 10 2018 05:55 PM

Sounds like a plan. Be sure to take a few pics along the way. Sounds like an interesting build. Any help you need just ask in the garage forums and let us help.
Posted By: EvanV

Re: Roll Call? - Tue Mar 27 2018 12:55 AM

Hey, Evan here from Edmonton, Alberta. With the snow starting to melt away I'm resuming work on my '59 6500. Starting work on the brakes and fixing things here and there as they come up. Rebuilt and painted my master cylinder. Now I'm just waiting to borrow a double flaring kit to do the brake lines. Excited to have the brakes working in the coming weeks.
Posted By: Tophat

Re: Roll Call? - Tue Mar 27 2018 01:15 AM

Any east Phoenix area bolters there is a car show at Hampton and power Road in east Mesa (old K-mart parking lot) every Saturday night hopefully I’ll be bringing my new bolt up there soon 🎩
Posted By: jamshack

Re: Roll Call? - Sat May 05 2018 06:58 PM

Colorocky Springs.
Posted By: Hunter1959

Re: Roll Call? - Mon May 07 2018 09:00 PM

Hello from Colorado Springs. I have a 1959 Chevy Apache.
Posted By: Fort Knox

Re: Roll Call? - Tue May 15 2018 07:30 PM

Hello from the beautiful Flathead Valley in the heart of Northwest Montana! I've got a 1961 C10 that is my baby. Love it out here!

Kyle
Posted By: COWayne

Re: Roll Call? - Mon Aug 06 2018 11:01 PM

Colorado Springs - Free car show, August 11th at Brayla Weddings & Events located at 2165 Academy Pl., 9 am until 12 pm. Let's fill the parking lot with Stovebolts! I'm planning on bringing one out. Hope to see you there to chat about these classics.
Posted By: dbwr

Re: Roll Call? - Fri Aug 17 2018 10:09 PM

Have a '60 ¾ ton (2wd) - I need a second set of eyes
on my truck - should I rebuild the existing 235 ?
Drop in a 350 with auto for daily driver ?
Drives ok, but need lower ratio axle - pretty sure 4.57.
... you know, the Eaton HO one.
If I change axle, could also change tranny/engine.
[ would keep 235 / 4spd and rebuild over time ]

Any volunteers ?
( in Wheat Ridge )
Posted By: Rusty Rod

Re: Roll Call? - Sat Aug 18 2018 03:46 PM

dbwr, you have many options with that truck.

I had a 66 GMC. It originally came with an inline 6. It also sported an LS6 454, a 400, a 350, a 305 and now a built 350. They all pretty much "bolt in", other than exhaust when going from the 6 or 454 to the SBC.
Posted By: 5/8 ton

Re: Roll Call? - Thu Sep 27 2018 01:51 PM

Glendale, AZ here with 2 1947 1/2ton ADs. One 3 window and one 5 window
Posted By: Rusty Rod

Re: Roll Call? - Fri Sep 28 2018 07:11 PM

Welcome 5/8's to our quiet corner of the "Bolt.
Posted By: Rugo

Re: Roll Call? - Mon Oct 01 2018 03:01 AM

5/8 ton,

Hello from Gilbert AZ. Congratulations on owning 2, 47 3100's. Not very people have one.

Rugo
Posted By: 5/8 ton

Re: Roll Call? - Tue Oct 02 2018 02:59 AM

Rugo, I have not seen many 47 5 windows so I jumped at the chance to own it. No Vin tag, but I've searched long enough to know the quirks of a 47 over a 48.

By chance does anyone know where I might find a driver side rear fender?
Posted By: Rugo

Re: Roll Call? - Wed Oct 03 2018 03:48 PM

5/8 ton

I was fortunate enough, not to have to try to find body parts, when we moved down to this area. So, I don't have any sure fire places for you. However, I would sure think that you could find one at a wrecking yard, that specializes in vintage vehicles. Or, you can contact Joe Mendola "Mothertrucker". He is down in Tucson. He has about everything, parts related to AD trucks. His email is: mothertruckeraz@aol.com Those would be the two directions I would take, if I were you. Hope that it helps you out.

Rugo
Posted By: Bwana-Jim

Re: Roll Call? - Sun Nov 04 2018 04:08 AM

Just joined...Boise, ID. I’m privileged to have this site as my “go-to” My divorce cause was found in a storage facility in Donnelly ID- 1952, 5 window, 216 cu in.
Posted By: Rugo

Re: Roll Call? - Sun Nov 04 2018 03:01 PM

Bwana-Jim, Welcome to the Stovebolt site. Congratulations on your find. There is a lot of really good information on this site. A great bunch of guys willing to help. Looking forward to your questions. Rugo
Posted By: Bread

Re: Roll Call? - Sun Dec 02 2018 07:50 AM

Good morning, good afternoon, good evening, and good day to you all whenever you all get to check into Rocky Mountain Bolters (RMB). We are spread out pretty far from each other but also close enough that a day trip or a weekend getaway is possible. I travel across I10 and looking forward to exploring more north. If I happen to be in your neck of the woods/desert, I’ll reach out to ya and see if ya would be interested in a cup of joe and or a bite to eat.

Bread
Posted By: Rusty Rod

Re: Roll Call? - Sun Dec 02 2018 05:53 PM

I make it a point to reach out to family, friends and acquaintances on every trip I make now. I've been so close or had folks so close but not made the time to even make a grip n grin too many time.

I was in Sierra Vista the monday before thanksgiving for a day and a half. I'd like to move down there, but the altitude is too much for my wife. (she wants to move closer to sea level)
Posted By: ndkid275

Re: Roll Call? - Mon Dec 03 2018 03:23 AM

If you ever come as far as El Paso, I always have beer and food. Maybe we can attempt a get together somewhere. The Texas bolters are spread out as well. Having a hard time finding anyone close.

Chris
Posted By: Bread

Re: Roll Call? - Mon Dec 03 2018 05:32 AM

Chris,
I’ll be passing through El Paso some time this month so I’ll give you a heads up so the we can meet up for dinner or something. Texas is a big state and everyone is spread about but their out there. There’s a few Bolters in El Paso.

Bread
Posted By: ndkid275

Re: Roll Call? - Mon Dec 03 2018 01:11 PM

Sounds good! Just Give me a heads up!

Chris
Posted By: Rugo

Re: Roll Call? - Sat Dec 08 2018 03:32 AM

Bread,

If you are ever going to be in the Gilbert area, let me know. Would like to meet a fellow Arizona bolter.

Rugo
Posted By: Bread

Re: Roll Call? - Sun Dec 09 2018 06:44 AM

Mr Rugo,
Your just out side of Phoenix which is a few hrs down the street, I can see us meeting up for a cup of coffee and getting to know the neighbors down the street, I’ll have to look at my calendar because we’re about to take a trip to TX and visit some family for the holidays.

Bread
Posted By: Rugo

Re: Roll Call? - Sun Dec 09 2018 03:11 PM

Bread,

Have a safe trip to Texas. Enjoy the drive. Keep me posted, if you find yourself headed this way. Good to hear from you.

Rugo
Posted By: Twinshadows

Re: Roll Call? - Tue Feb 05 2019 07:48 PM

Hi There

Twinshadows here in Chino Valley, Arizona --- up north in the Prescott area. just Checking - in .....

and, looking / interested in finding an early style "Stovebolt -- 48 - 54 Chevy - GMC truck.

glad to be here in the "Stovebolt World" ........ Thanks for letting me join - in .

Jim
Posted By: Rusty Rod

Re: Roll Call? - Thu Feb 07 2019 12:23 AM

Welcome to our quiet corner of the 'bolt.
Posted By: RatBrawd

Re: Roll Call? - Sat May 04 2019 04:52 PM

Hello from the Steel City! aka Pueblo, Colorado! I'm thrilled to a part of the Forum!
Posted By: 49 3100

Re: Roll Call? - Sat May 04 2019 09:26 PM

Hi from Taos--not far away--have a 49 and 51 3100 almost done--never happen GI. Both have 1954 235 rebuilt engines with 848 Heads, Fenton headers and dual exhaust.
come visit..Bill
Posted By: Jon In Tucson

Re: Roll Call? - Mon May 27 2019 08:36 PM

Hi From Tucson! AKA the Cactus Patch. I am resto modding our 1951 Chevy 5 window 1/2 ton.
Jon In Tucson
Posted By: Rusty Rod

Re: Roll Call? - Thu Jun 13 2019 04:27 AM

Welcome to the most quiet forum on the Stovebolt.
Posted By: ResidentHill

Re: Roll Call? - Fri Jun 21 2019 02:40 AM

New Colorado member and new to the older GMC trucks, have had a couple GMC 2500HD's. Looking if there is anyone around my neck of the woods that has any resources for parts. Recently acquired a 1959 GMC 100 potentially a fleet option that has been sitting in Lochbuie for over 20 years.
Posted By: scottss60

Re: Roll Call? - Sat Jun 22 2019 02:20 PM

Still have it?
Posted By: scottss60

Re: Roll Call? - Sat Jun 22 2019 02:20 PM

Still have it?
Posted By: ResidentHill

Re: Roll Call? - Thu Jun 27 2019 10:32 AM

Are you asking if I still have the 59?
Posted By: BigBlockMan

Re: Roll Call? - Fri Jul 19 2019 03:21 AM

New member from North Central Montana here.....just checking in.
Posted By: Rusty Rod

Re: Roll Call? - Sat Jul 20 2019 04:56 AM

Welcome to the quietest forum on the 'bolt.
Posted By: RmJr

Re: Roll Call? - Thu Aug 08 2019 02:13 AM

Hello from Santa Fe, NM
Posted By: Rusty Rod

Re: Roll Call? - Fri Aug 16 2019 11:52 PM

Hello RmJr, welcome here.
Posted By: Snowman51

Re: Roll Call? - Wed Aug 21 2019 10:28 PM

Just got my 1951 5 window Chevy 3100 running! Sat for 18 years but now back on the road. Complete with new handmade Colorado blue stain pine bed. Got lots of leftover parts.
Posted By: tclederman

Re: Roll Call? - Wed Aug 21 2019 10:40 PM

Congratulations, Snowman 51

Can you post a few pictures?

Post your parts for sale in the Swap Meet.
Posted By: Rusty Rod

Re: Roll Call? - Thu Aug 22 2019 04:37 AM

Congrats on getting the truck on the road. Ditto's on posting the parts only in the Swap Meet... some of us mod's get testy about that.
Posted By: Snowman51

Re: Roll Call? - Sun Aug 25 2019 03:21 PM

Thanks. Need help posting pics.
Posted By: Rusty Rod

Re: Roll Call? - Mon Aug 26 2019 04:08 AM

I haven't figured out the pix posting yet. But apparently, there are instructions at the top of each forum page? But don't quote me on that
Posted By: 2-Ton

Re: Roll Call? - Mon Aug 26 2019 04:33 AM

I just save the photos to my computer and then look them up under Attachment Manager.
Click and save and they are there.

Don

Attached picture IMG_2263.JPG
Attached picture IMG_2254.JPG
Posted By: MontanaLee

Re: Roll Call? - Tue Sep 03 2019 01:59 PM

Al Lake Lee from Missoula here-
Posted By: Rusty Rod

Re: Roll Call? - Tue Sep 03 2019 11:22 PM

Welcom Al... I just drove through Missoula a couple weeks ago... lots of nice old iron in them thar hills.
Posted By: Wally / Montana

Re: Roll Call? - Wed Sep 11 2019 07:11 PM

Hi, Montana Lee. I have a '48 3/4T too. Maybe you've seen it around Missoula. Check web site in signature.
Posted By: algoddar

Re: Roll Call? - Tue Oct 08 2019 04:25 PM

Anthony Goddard from Benson Arizona, new to the Stovebolt and new to any forum,...just wanted to say hello and thanks to one and all for a great place to go to for help, advise, or to be able to help others. in my short time of being a member,.. it seems that everyone here is really happy to see others succeed with there projects....truly a breath of fresh air!!
Posted By: Rusty Rod

Re: Roll Call? - Tue Oct 08 2019 10:15 PM

Welcome to our quiet corner of the 'bolt.
Posted By: David C.

Re: Roll Call? - Wed Oct 09 2019 03:29 AM

David C. from Miles City, Mt. It is kind of quiet out here in Eastern Mt. But that's what I like about it most.
Posted By: taskforceguy

Re: Roll Call? - Thu Oct 17 2019 03:31 AM

Pat in Denver
58 1 ton Napco GMC Napco kept in the city
10 addl taskforce trucks kept out in the country


Pat Tharan
© 2019 The Stovebolt Forums