Stovebolt.com
Posted By: Case_man C65 rear hub removal - Wed Oct 13 2021 11:27 PM
If I’m looking at the manual correctly I have everything loose. Both nuts are out. I can move it back and forth and after a lot of work I have moved it out slightly. Is this going to take a big stout puller? I want to make sure before I damaged anything. Thanks.

Attached picture 2B2CA666-E659-4E20-B5A8-A43FB06D73DF.jpeg
Attached picture 20A3177F-2182-477C-A8AA-E541D6A49D20.jpeg
Posted By: EdPruss Re: C65 rear hub removal - Thu Oct 14 2021 01:57 AM
I have always been able to pull one off from this position.

Ed
Posted By: Case_man Re: C65 rear hub removal - Thu Oct 14 2021 02:42 AM
Thanks I’ll see if I can get it pulled.
Posted By: 78buckshot Re: C65 rear hub removal - Thu Oct 14 2021 02:44 AM
Were you able to back off the brake shoe adjustment, that is normally what is keeping you from sliding the hub off. If the shoes are not the issue then the bearing may have spun on the axle tube and partly seized. Rig up a pusher from the back.
Posted By: Case_man Re: C65 rear hub removal - Thu Oct 14 2021 03:02 AM
I didn’t mess with the brake adjustment I will check that first thing. I like the pusher idea also. I’ll get back on this in the morning. Thanks for the advice.
Posted By: Case_man Re: C65 rear hub removal - Thu Oct 14 2021 02:14 PM
Loosening the pads did it thanks again!

Attached picture E7DE0F93-211F-43B5-807B-E19C6F8D0EA9.jpeg
© The Stovebolt Forums