I need the eccentric shoulder bolt with the crown nut that adjusts the e brake on the rear of my '37 1/2 ton. Can't find any listings on the usual sources online. I don't know the years of overlap but guessing all rear huck brakes were the same or similar. Anyone? PM me.

Group 5.158 Parking Brake Lever Anchor Bolt

1936-50 Car & 1/2 ton...(3/8-24 x 15/16) (w/eccentric)....475492

Mike B

thanks Mike. from a parts book? Know of a source?

Yes, Parts Book...I don't have a source, sorry!

Mike B

Do you have one to use as a pattern? It shouldn't be difficult to make one.
Jerry

37GC have u found your bolt?,if not im parting out a 52 gmc 1/2ton chassis and has complete rear axel come pull yer part 1-719-205-2203

Your 52 would have Bendix brakes. Not compatible with Huck brakes on a '37.

Why not just make an eccentric to thread onto a regular 3/8-24 bolt? All that takes is a 4-jaw chuck on a small lathe.
Jerry

Yep, I know its a simple part to rig Jerry but no lathe at this household and moved away from old contacts.

Yes ur correct,but have several front brakes and dont see this adjuster ecentric on these huck brakes must be a rear brake only thing? as all seem to have the screw type adjuster at cap of wheel cyclinder?