I'm interested in your brackets, My truck is missing the brackets and bumper so I do not have anything to compare to. how sure are you they are for a 3/4 ton?
Not real sure as I haven’t compared them to 3/4 ton truck’s rear bumper brackets.
When I got my 51, 3100, they were laying in the bed. When I tried to install them, they fit the frame correctly but didn’t line up with the bumper bolt holes. I have since acquired 1/2 ton rear bumper brackets and everything bolted up as it should.
From what I’ve read the 3/4 ton frame is more narrow at the rear then the 1/2 ton.
Maybe one of our fellow bolters can offer some guidance on how to verify what they fit?
I'll start a new thread to see if someone can get us some measurements.
Great, thank you.
If you were closer I’d ship these to you to see if they fit. If they didn’t you could ship them back, unfortunately the shipping cost probably eliminates that option.
you would't happen to know what shipping to Utah might cost?
What’s your zip code? I can go to the UPS Store on Monday and find out.
UPS estimated $45.75 to zip code 84414.
I am going to meet up with a fellow bolter near me to measure the brackets on his truck
I'll let you know what I find out.
Great, that will be a big help.
I went and checked out the brackets on a 3/4 ton today, I am willing to take a chance on your brackets..I can offer $100 shipped if that's something you could do
I think I have my OEM bumper brackets fairly priced and I’m going to stick with $75 plus shipping. Aftermarket reproduction brackets are $120 plus shipping from Classic Parts.
Let me know if that works for you and I can ship them today.
I need to think it over.....the measurements don't match up quite rite. if yours are 3/4 ton brackets they may have gotten bent at some pount in their lifespan. I can let you know monday what I decide.
If you need additional measurements or pictures, just let me know.
I've decided to pass on the brackets for the moment but thanks just the same.