|
|
STOVEBOLTING!
Ready to get the truck on the road?
The Side Lot has the places with some action!
From West to East, South to North ... into Canada, of course!
Some groups have posted events that cover your roaming area.
Check in for starters, and check back often. Might be missing something like this
or
some variety.
|
|
|
19 members (FAST55, 1946chevypickup, 32vsnake, FarmFresh47, Chris Fingar, carbking, 1 invisible),
98
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums60
Topics128,793
Posts1,059,854
Members46,755
| |
Most Online1,229
Jan 21st, 2020
|
|
|
|
Joined: Feb 2022
Posts: 161
OP
'Bolter
|
Hello, got some pine boards for 53 truck bed, what are other alternatives to use other than bed strips?
|
|
|
|
|
Joined: Oct 2021
Posts: 1,917
'Bolter
|
Laminate it like a butcher block and install it in one piece?
1939 Packard Standard Eight Coupe (The Phantom)
1950 Chevrolet 3100 (Ol' Roy)
1956 Cadillac Coupe de Ville (The Bismarck)
1966 Oldsmobile Toronado (The Purple Knif)
1966 Ford Mustang (Little Red)
1964 Ford Galaxie 500 coupe
1979 Ford F-100
1976 Ford F-150 (Big Red)
1995 Ford F-150 (Newt)
|
|
|
|
|
Joined: May 2015
Posts: 7,010
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
|
Laminate it like a butcher block and install it in one piece? Installing a single piece in a '53 bed would be a trick. You'd have to remove the front panel and slide the single piece in below the angle strips and then reinstall the front panel and cross sill. Expansion and contraction of the wood would be an issue. Those might work, but you wouldn't be able to carry any sand in the bed. Unless your objective would be to spread that sand along the road. It would leak thru the cracks.  Mar-K has different options for the bed strips, including hidden fasteners. If you're looking to eliminate the bed strips altogether, you could fasten them with wood screws through the cross-sills from below, but you'd need some provision to allow the wood to expand and contract. It would likely expand and buckle or contract and crack. GM had a pretty good design for the wood installation in the first place. Many wood beds have lasted 60+ years.
Kevin Newest Project - 51 Chevy 3100 work truck. Photos [ flickr.com] #2 - '29 Ford pickup restored from the ground up. First car '29 Ford Special Coupe Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
|
|
|
|
|
Joined: Jan 2019
Posts: 799
Herder of Cats, Goats, and Sheep (moderator)
|
When I haul sand, I generally throw a tarp down first to make it easier to clean out.
The bigger downside to the hidden fasteners (in my opinion) is that the bed strips give you something to slide pallets and such on without scraping up the wood.
|
|
|
|
|
Joined: Sep 2001
Posts: 31,754
Bubba - Curmudgeon
|
When I haul sand, I generally throw a tarp down first to make it easier to clean out.
The bigger downside to the hidden fasteners (in my opinion) is that the bed strips give you something to slide pallets and such on without scraping up the wood. yes
|
|
|
|
|
|
|
