The Stovebolt.com Forums Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Celebrations!!!


HAPPY
BIRTHDAY

C A N A D A

July 1

Over 2022 Bolters live "up over" ... a cool addition to the flavor of
The Stovebolt Page.


Birthday salutes here!

Stovebolt Site Search
'
Oh Lord, I just gotta find it....

A pdf guide to help you search the Site


Old Truck Calendars
Months of truck photos!
Nothing like an old truck calendar

Stovebolt Calendars

Check for details!


Who's Online Now
11 members (87GN, buoymaker, fixite7, 68ironhead, Bowtie john, 1 invisible), 101 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums59
Topics128,032
Posts1,036,687
Members45,918
Most Online1,229
Jan 21st, 2020
Step-by-step instructions for pictures in the forums
Previous Thread
Next Thread
Print Thread
#1436634 Sun Jan 09 2022 04:50 AM
Joined: Jun 2008
Posts: 1,714
S
'Bolter
I was given a 216 head said to be NOS. It’s covered in surface rust after being stored indoors 70+ years. If it were to be installed would it require any major machine shop work or could it simply be cleaned up with a wire brush and a bit of light sandpaper? Might be a couple of dirtdauber nests that would need cleaning out too.

Attached Images
6CECB69D-EB69-4753-9C3F-8B175CBFDBEB.jpeg (167.94 KB, 156 downloads)

Chuck
1950 Chevy 1/2 ton (all original)
1951 Chevy 1/2 ton (future streetrod)
1941 Chevy coupe
1938 Chevy coupe streetrod
Joined: Feb 2004
Posts: 24,540
H
Kettle Custodian (pot stirrer)
I'd give it a good cleanup and ask a local machine shop to do a magnaflux inspection. Even though it's supposed to be "new", 216 heads were notorious about getting heat cracks.
Jerry


"Freedom's just another word for nothing left to lose"
Kris Kristofferson

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!

WAG MORE- - - - - -BARK LESS!
Joined: Mar 2010
Posts: 10,104
5
'Bolter
The machine shop should be able to clean that right up. The one I use disassembles it, puts in their engine block "washing machine" before doing any testing. Comes back ready for paint.

Joined: Jun 2008
Posts: 1,714
S
'Bolter
Jerry, I’d have never suspected a cracked NOS head! It’s never been bolted onto a block! Thanks though for letting me know it’s possible.
I’ll ask a machine shop how much they would charge to give it a good cleaning.

Thanks


Chuck
1950 Chevy 1/2 ton (all original)
1951 Chevy 1/2 ton (future streetrod)
1941 Chevy coupe
1938 Chevy coupe streetrod
Joined: Feb 2004
Posts: 24,540
H
Kettle Custodian (pot stirrer)
If you're sure it's never ben run, that's a different story. Some folks have a habit of confusing the terms "very low mileage" with "new old stock".
Jerry


"Freedom's just another word for nothing left to lose"
Kris Kristofferson

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!

WAG MORE- - - - - -BARK LESS!
Joined: Dec 2017
Posts: 1,129
D
'Bolter
That and you dont know haw that head was handled over the years. Was it stored standing up, did it ever fall over and possibly crack? I know its nos, but if that is rust on those springs and retainers, they are not worth saving. Same for the valves. If they are really rusty, they will likely need replacement. Frankly, to use that head, if it passes magnaflux inspection, it will need a standard going over just like any other rebuild. On the other hand, you have a head that is not full of trash and has not been messed with so should build rather nicely.

Last edited by Dragsix; Mon Jan 10 2022 02:14 PM.

Mike
Joined: Dec 2018
Posts: 1,576
F
'Bolter
Spotbiltxo Would put in better exaust valves,guides should be fine,for real long term service will need hard seats .


Moderated by  Woogeroo 

Link Copied to Clipboard
Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 7.7.5