Grease Monkey, Moderator General Truck Talk & Greasy Spoon
Please post the year/model of your vehicle every time you post. Takes the guess work out of the equation for the experts. Thanks
Martin '62 Chevy C-10 Stepside Shortbed (Restomod in progress) '47 Chevy 3100 5 Window (long term project) ‘65 Chevy Biscayne 4dr 230 I-6 one owner (I’m #2) “Emily” ‘39 Dodge Businessmans Coupe “Clarence”
"I fought the law and the law won" now I are a retired one! Support those brave men/women who stand the "Thin Blue Line"! Hug a cop! USAF 1965-1969 Weather Observation Tech (I got paid to look at the clouds)
I can't help you directly, as I don't know what an original '37 GMC COE would have regarding the handles for the windshield regulators. Apparently, there are two separate regulators for the split windshield, unlike the 1/2 ton trucks which have a single piece of flat glass and only one regulator. I can tell you that my '37 Chevy and '42 Chevy half ton trucks have a bolt or nut connecting to the center of the spline, easily noted at the hub of the handles. My Diamond T has a similar arrangement of the the handles for the two regulators for it's split windshield.
From looking at your picture a previous owner may have glued a handle to the splines of your regulator. I hope that is not the case but if it isn't obvious how to remove the handle, that is a likely possibility. Assuming that is true, perhaps judicious use of a propane torch to the junction of the handle and spline may soften the adhesive enough to pull off the handle.
Last edited by Lightholder's Dad; Wed Sep 22 2021 08:06 PM.
Take a small mirror and look from behind the crank handle. I'm thinking of various door handles that I have removed in the past. Maybe it has a set screw or a retaining ring that fits into a groove on a splined shaft.
Last edited by buoymaker; Thu Sep 23 2021 02:26 AM.
I suspect the PO probably didn't want to cut a circular slot in the shaft for the clip. If you have tried pulling the handle straight off and it does not move or even wiggle slightly then, oh the horror, epoxy/glue.