The Stovebolt.com Forums Home | FAQ | Gallery | Tech Tips | Events | Features | Search
Whatcha doing now?
What did you get done on your Bolt today? - 2021 and later
The original thread is still in tact and we have 14 pages already for this time frame. A "mini-Project Journal" if you will.

Stovebolt driving report
Started by Cletis in 2012 - 36 pages and going strong!

Who uses their truck as a truck - 2021 and later

Re-started this thread. Three pages and counting.

Bolters in the Side Lot
are planning get togethers and what not. See who's near you.

Stay busy; keep warm!
Share your enthusiam.
Searching the Site

Get info about how to search the entire Stovebolt site here. To do a search for just the forums, get those details in the IT Shortbus fourm.
2023 Old Truck Calendars
First one
Nothing like old trucks working

2023 Stovebolt Calendars

Check for details!


Who's Online Now
7 members (delky, 50shep, 2ManyTrucks, Dudy, Asahi1234, farmallb), 65 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums59
Topics128,323
Posts1,054,063
Members46,606
Most Online1,229
Jan 21st, 2020
Step-by-step instructions for pictures in the forums
Previous Thread
Next Thread
Print Thread
#1405079 Wed Apr 07 2021 02:58 AM
Joined: Sep 2007
Posts: 436
R
'Bolter
My kid and I replaced a headlight switch on his '52 panel today. It was a replacement switch (12 volt) with the removable shaft. When the park lights were turned on, the headlights came on. Are only the park lights supposed to come on when the switch is in the first position? Are the park lights supposed to turn off when the switch is in the second position (headlights on)? All the lights work (i.e.brake, turn, hi-beam,low-beam). If I leave it the way it is, will it cause any problems? Thanks.


It's a small world, but I wouldn't want to paint it.
Joined: Jul 2000
Posts: 1,801
G
Insomniac
Quote
Are only the park lights supposed to come on when the switch is in the first position?
Yes
Quote
Are the park lights supposed to turn off when the switch is in the second position (headlights on)?
Yes

Quote
All the lights work (i.e.brake, turn, hi-beam,low-beam). If I leave it the way it is, will it cause any problems?
Probably OK. If the circuit breaker trips, you have too much load. I wired the parking lights to the tail light terminal so the parking lights are lit in both positions. No issue with that.


Gord
----
1954 1/2 ton 235 4 speed
Joined: Sep 2007
Posts: 436
R
'Bolter
Figured it out. My kid had put the headlight wire on the taillight terminal.. He misread a diagram of the switch.


It's a small world, but I wouldn't want to paint it.

Moderated by  Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 7.7.5