The Stovebolt Page Forums Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Helping out ...


EVENTS

Check in for status!

Jump over to the Events Forum, to post events -- new ones or the ones we have been enjoying for some time.
Look to see what's been cancelled or postponed.

Encourage one another!

Stovebolt Site Search
 
Old Truck Calendars
Months of truck photos!
Nothing like an old truck calendar

Stovebolt Calendars

Check for details!


Who's Online Now
11 members (66flea, DennisM, 51 2 Ton, Flatblu4748, 53 green 1- ton, 1 invisible), 182 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums50
Topics118,977
Posts952,350
Members43,300
Most Online1,229
Jan 21st, 2020
Image Posting Policy
Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: 1957 1/2 ton H033 axle spacer
LAJones48 #1348003 Wed Feb 26 2020 08:02 PM
Joined: Feb 2004
Posts: 20,194
H
Boltergeist
This situation looks like a case of "tolerance stacking". If one or both axle shafts are a little on the short side, but still within the manufacturing tolerance, and the spacer block happens to be on the small side as well, it's possible the recommended clearance will be at, or beyond the specified limit. Add a little wear anywhere. such as on the ends of the axles, and suddenly the stackup is out of theoretical limits. At the very worst, I doubt if an extra side to side motion of the back end of the truck the thickness of a business card is going to cause any problems.
Jerry


The murder victim was drowned in a bathtub full of Rice Krispies and milk.
The coroner blamed the crime on a cereal killer!

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
Re: 1957 1/2 ton H033 axle spacer
LAJones48 #1348008 Wed Feb 26 2020 08:28 PM
Joined: Dec 2011
Posts: 119
D
Shop Shark
LAjones48
I checked my spacer at (axle wear marks sides) at 1.1567" and opposite side at 1.1587"
delky dave in wyo


1957, 3100, v8
1990 Suburban
Re: 1957 1/2 ton H033 axle spacer
LAJones48 #1348009 Wed Feb 26 2020 08:37 PM
Joined: May 2007
Posts: 95
L
Shop Shark
Thank you all for your help. I’ve installed the new spacer. It’s wider than the original at 1.168” vs 1.157” so I got it tightened up a bit, but I admit this is more of a solution looking for a problem. Time to move on to the next stage.

Cheers,
Larry

Page 2 of 2 1 2

Moderated by  SWEET 

Link Copied to Clipboard
Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 7.7.4