This thread is specifically for Jon G for the benefit of all of us bolters. Back in September 2018 you wrote a thread on Straightening the Rochester B and BC castings #128069. Unfortunately, none of the links for pictures worked for me and I suspect they won’t work for other’s as well. Can you resurrect this article and add the pictures so they reside in the Stovebolt Forum (Attachment Manager) instead of links, so they are captured forever?
This article is definitely worth a place in the Tech Tips, so it won’t disappear and get buried.
Last edited by Phak1; Sat Dec 21 2019 02:40 PM.
1952 Chevrolet 3100 Project Journals ‘59 235 & hydraulic lifters “Three on the Tree” & 4:11 torque tube 12v w/ Alternator
Hi Phil, Thanks for the message. I can do that. I probably will have to work on it after Christmas, though. The image link problem is with Photobucket. Whether they are going out of business or not, I can't say but they definitely are running people away from using their service and acting very oddly, so I removed all my images while I could. I need to either move them to Google photo or just post them through using the Stovebolt resources. I had hoped they would stay around forever, but in the digital world "forever" could be only a few years.
Jon - I get the message to sign in to a Google account.
Good carburetion is fuelish hot air The most expensive carburetor is the wrong one you attempt to modify If you truly believe "one size fits all" try walking a mile in your spouse's shoes! [image]http://www.thecarburetorshop.com/Avatar.jpg[/image]