The Stovebolt Page Forums Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Helping out ...


EVENTS

Check in for status!

Jump over to the Events Forum, to post events -- new ones or the ones we have been enjoying for some time.
Look to see what's been cancelled or postponed.

Encourage one another!

Stovebolt Site Search
 
Old Truck Calendars
Months of truck photos!
Nothing like an old truck calendar

Stovebolt Calendars

Check for details!


Who's Online Now
19 members (55_2nd_Series, Chris McKenna, '54 3600, 57 Apache Stock, 3 invisible), 192 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums50
Topics118,861
Posts951,352
Members43,282
Most Online1,229
Jan 21st, 2020
Image Posting Policy
Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: Ball Housing Collar
Hotrod Lincoln #1314546 Sun Jun 16 2019 10:07 PM
Joined: Mar 2011
Posts: 1,474
J
Shop Shark
Helpful links to get on the same page.

Parts illustration
Everything from shims to the left are the same on manual trans. truck, except manual trans. ball collar & shims > are 4 bolt holes

Torque Tube oil leak THREAD

Ball Housing Parts


Re: Ball Housing Collar
Sedgewick #1315320 Sun Jun 23 2019 12:10 AM
Joined: May 2013
Posts: 82
D
Shop Shark
Your situation sounds exactly like mine. I had a leak at the ball, but more of a leak at the rear of the "tube" where the collar threads on. I had a gasket set and thought I would just slide the collar back, remove the old seal, slice the new seal, put it around the shaft, apply a drop of super-glue and tighten everything back up. I spent several hours trying to do that and gave up. When I unscrewed the collar and slid it back, I never could get the two washers and old seal to come out of it. I tried pushing all sorts of thing screwdrivers up into it with no luck. I even cut some sheet metal and made sort of a pusher to slide up into that groove and push those washers and seal out. No luck. So, I ended up having to remove the entire u-joint (trunnion) to be able to slide that collar off. I'm glad I did because I discovered that my u-joint is scarred up pretty good, so I'll be replacing that. I did all this today, and this is a first for me on this type of truck. I'm learning as I go.


'52 Chevy 1/2 ton running original gear
Page 2 of 2 1 2

Moderated by  SWEET 

Link Copied to Clipboard
Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 7.7.4