The Stovebolt Page Forums Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Work those trucks!




Share what you're up to this summer!

Stovebolt Site Search
 
Old Truck Calendars
Months of truck photos!
Nothing like an old truck calendar

Stovebolt Calendars

Check for details!


Who's Online Now
7 registered members (Harold46, bartender, Green_98, Jon G, BearsFan315, carbking), 184 guests, and 3 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums47
Topics115,006
Posts912,467
Members42,075
Most Online940
Apr 5th, 2017
Image Posting Policy
Previous Thread
Next Thread
Print Thread
49 3100 250 Swap #1309963
Tue May 07 2019 05:47 PM
Tue May 07 2019 05:47 PM
5
51cowboy  Offline OP
Wrench Fetcher
Joined: May 2014
Posts: 47
Cranfills Gap, Texas
I am in the process of installing a 250 six in a 1949 3100. I plan to use the bell housing and 3 speed transmission from a 64 c10. The rear end is from a 1955 3100 with 3.90 gears.
I want to use the original steering column and the clutch and brake pedals. Where I need some help is on the clutch linkage. Can I use all of the 49 clutch linkage including the throw out bearing arm? I am hoping that someone else has done this and can steer me clear of problems.
Thanks for your Help!

Re: 49 3100 250 Swap [Re: 51cowboy] #1310013
Wed May 08 2019 05:12 AM
Wed May 08 2019 05:12 AM
H
Hotrod Lincoln  Online
Boltergeist
Joined: Feb 2004
Posts: 18,559
Dellrose, TN
No, you're going to have to do some fabrication, beginning with installing the bell housing crossmember from a 1954 or 55 1st. series truck. Since there was no similar bellhousing prior to the 55 2nd. series V8, there probably won't be a bolt-in swap for the clutch linkage. "Measure twice- - - -cut once!
Jerry


The murder victim was drowned in a bathtub full of Rice Krispies and milk.
The coroner blamed the crime on a cereal killer!

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
Re: 49 3100 250 Swap [Re: 51cowboy] #1310030
Wed May 08 2019 12:51 PM
Wed May 08 2019 12:51 PM
5
51cowboy  Offline OP
Wrench Fetcher
Joined: May 2014
Posts: 47
Cranfills Gap, Texas
I modified the 49 crossmember to fit the 64 bell housing. I am trying to decide which clutch fork to use; one for the 64 bell housing or the one for the 49. Any thoughts?
Thanks Jerry!

Re: 49 3100 250 Swap [Re: 51cowboy] #1310037
Wed May 08 2019 02:47 PM
Wed May 08 2019 02:47 PM
H
Hotrod Lincoln  Online
Boltergeist
Joined: Feb 2004
Posts: 18,559
Dellrose, TN
Compare the length of both forks, both the inner and outer dimensions from the pivot ball. The inner dimension is the most critical, since the fingers that operate the throwout bearing need to align exactly with the center of the hole in the bell housing. It's fairly simple to figure out and fabricate the geometry to make the outside dimension work right.
Jerry


The murder victim was drowned in a bathtub full of Rice Krispies and milk.
The coroner blamed the crime on a cereal killer!

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
Re: 49 3100 250 Swap [Re: Hotrod Lincoln] #1310094
Thu May 09 2019 12:57 AM
Thu May 09 2019 12:57 AM
5
51cowboy  Offline OP
Wrench Fetcher
Joined: May 2014
Posts: 47
Cranfills Gap, Texas
Got it! Thanks again!


Moderated by  KCMongo 

Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 7.6.1.1