The Stovebolt Page Forums Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Work those trucks!




Share what you're up to this summer!

Stovebolt Site Search
 
Old Truck Calendars
Months of truck photos!
Nothing like an old truck calendar

Stovebolt Calendars

Check for details!


Who's Online Now
14 registered members (78buckshot, BC59, 3B, beltfed, 2ManyTrucks, 49nut), 331 guests, and 3 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums47
Topics115,030
Posts912,759
Members42,085
Most Online940
Apr 5th, 2017
Image Posting Policy
Previous Thread
Next Thread
Print Thread
Page 1 of 3 1 2 3
door weather strip #1303625
Mon Mar 18 2019 09:07 PM
Mon Mar 18 2019 09:07 PM
B
bluesman  Offline OP
Shop Shark
Joined: Apr 2017
Posts: 413
Central Missouri
I'm getting ready to install the rubber weather strip on my doors, (1953 chevy one ton) and am having a problem. I can't figure out how to get the adhesive onto the front edge of the door. There just isn't enough clearance between the door and the frame to get in there.
And it doesn't help that the hinges are also in the way. Everything I've read says to put the weather strip on after the doors are hung, so that's the way I went, but there must be a trick to it. Any suggestions or advice?

Tim


I am currently digging back in to a 1953 3800 (one ton) with a nine foot bed. I've owned it since 1979, and drove it until 1982 (or so). My wife got me involved in restoring it back in 2002, got the body removed and the frame redone, then things came up. Now I am retired and starting again. If anyone is interested I have photos on Imagur ( https://timwhiteblues.imgur.com/ ). I live way back in the woods in the Ozarks on 40 acres at the end of a 2 1/2 mile private road.

Tim
Re: door weather strip [Re: bluesman] #1303628
Mon Mar 18 2019 09:21 PM
Mon Mar 18 2019 09:21 PM
HandyAndy  Offline
Shop Shark
Joined: Dec 2013
Posts: 605
SE Iowa
Tim,

Check these videos out. One vendor applies the weather stripping with the door on and the other uses the door off method.

Door On Method

Door Off Method

Let us know what method you end up using and how it worked for you.

Good luck,


Andy

His: 1947 Chevrolet 3100
Hers: 2008 American Saddlebred

"I may not have gone where I intended to go, but I think I have ended up where I needed to be." - Douglas Adams
Re: door weather strip [Re: bluesman] #1303690
Tue Mar 19 2019 03:33 AM
Tue Mar 19 2019 03:33 AM
MNSmith  Offline
"Hey! I sound like Darth Vader!!
Joined: Oct 2005
Posts: 2,598
So Cal
I did door off.

Re: door weather strip [Re: bluesman] #1303697
Tue Mar 19 2019 03:58 AM
Tue Mar 19 2019 03:58 AM
F
Fox  Offline
Shop Shark
Joined: Apr 2002
Posts: 1,410
Breton, Alberta
Door off for me too. Less cussing, fussing, and messing.



In the Stovebolt Gallery
More pictures here

1953 GMC 9430 1 ton dually—-Shiny!

1970 Chevrolet C10 - Grandpa’s- My first truck.—in progress to shiny
1972 Chevrolet C20- rusted
1970 Chevrolet K20 Suburban—rusted.
1950 Chevrolet 1300- in progress to shiny.

Parts trucks-
1951 GMC 9300
1951-GMC 9430
1951- Chevrolet 1300
Re: door weather strip [Re: bluesman] #1303745
Tue Mar 19 2019 03:44 PM
Tue Mar 19 2019 03:44 PM
5
52Carl  Offline
Master Gabster
Joined: Mar 2010
Posts: 7,969
Virginia
If you decide to take the door off, and you like the way the door fits currently, do yourself a huge favor and pin the hinges prior to removing the doors.
Use a new sharp high quality 3/16' or 1/4" drill bit to drill on hole for each hinge strap in the door. Drill through the inner door panel, hinge strap, and the sheet metal behind the hinge strap.
This will make it possible to put your doors in the exact same position.
Carl

Re: door weather strip [Re: bluesman] #1303907
Wed Mar 20 2019 03:27 PM
Wed Mar 20 2019 03:27 PM
C
cmayna  Offline
Shop Shark
Joined: Jan 2002
Posts: 1,908
Menlo Park, Ca
Yes for door off and while it's off, consider restoring the hinges


Craig's '50 Chevy 3100 5 window
My truck
If I'm not working on my truck or VW camper, I'm fishing with the wife or smoking Salmon.
Re: door weather strip [Re: bluesman] #1303929
Wed Mar 20 2019 06:26 PM
Wed Mar 20 2019 06:26 PM
MNSmith  Offline
"Hey! I sound like Darth Vader!!
Joined: Oct 2005
Posts: 2,598
So Cal
But, but, but, if he is happy with the current fit, and he pins the hinges, if he rebuilds them at that point, the fit will change!

If the hinges need rebuilding, remove door, install weatherstrip, rebuild hinges, re-fit door.

Re: door weather strip [Re: bluesman] #1303938
Wed Mar 20 2019 07:58 PM
Wed Mar 20 2019 07:58 PM
B
bluesman  Offline OP
Shop Shark
Joined: Apr 2017
Posts: 413
Central Missouri
I'm leaving the doors on, I got so lucky when I first hung them, next to no adjustment needed, that I don't want to risk messing things up. I did do the weather strip on one side, I managed by applying the adhesive to the rubber seal (the part that runs at the front edge of the door), then carefully maneuvering the rubber down between the body and hinges, stick it on at the top then ran down the door with a screwdriver to get it into final position. A real mess, ended up with adhesive all over me, some on door, some on body. Then I had to pull it off because I had it on the wrong direction!! I was just hoping someone had a better method.

I finally figured out how it should be facing by cutting a short strip and sticking it on the other door to check for fit.

So now I have to get the rubber on both doors.

Tim


I am currently digging back in to a 1953 3800 (one ton) with a nine foot bed. I've owned it since 1979, and drove it until 1982 (or so). My wife got me involved in restoring it back in 2002, got the body removed and the frame redone, then things came up. Now I am retired and starting again. If anyone is interested I have photos on Imagur ( https://timwhiteblues.imgur.com/ ). I live way back in the woods in the Ozarks on 40 acres at the end of a 2 1/2 mile private road.

Tim
Re: door weather strip [Re: bluesman] #1303941
Wed Mar 20 2019 08:26 PM
Wed Mar 20 2019 08:26 PM
M
miraclepieco  Offline
Shop Shark
Joined: Dec 2014
Posts: 457
OR
I did it door on. One tip I can offer: let the adhesive partially dry before installation; that way you won't get such a mess everywhere. If you read the directions you will see that it is recommended to let it skin up before application. I have tested it myself: weatherstrip adhesive actually bonds harder if allowed to dry a bit first.



1951 Chevy Panel Truck
Re: door weather strip [Re: bluesman] #1303943
Wed Mar 20 2019 08:48 PM
Wed Mar 20 2019 08:48 PM
Justhorsenround  Online
Grease Monkey
Joined: Apr 2005
Posts: 7,275
El Reno, Okla
According to the experts at Steele Rubber the adhesive should be applied in a thin coat to both surfaces and let dry to the touch. Then install slowly keeping everything in line. I can see where 6-8 hands would be nice when doing it that way. Once it makes contact with the other surface it’s not coming back off.


Martin
'62 Chevy C-10 Stepside Shortbed (Restomod in progress)
'47 Chevy 3100 5 Window (long term project)


"I fought the law and the law won" now I are a retired one!
Support those brave men/women who stand the "Thin Blue Line" and lock up those on the wrong side of that line.

Page 1 of 3 1 2 3

Moderated by  48bigtrucks 

Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 7.6.1.1