The Stovebolt Page Forums Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Work those trucks!




Share what you're up to this summer!

Stovebolt Site Search
 
Old Truck Calendars
Months of truck photos!
Nothing like an old truck calendar

Stovebolt Calendars

Check for details!


Who's Online Now
0 registered members (), 241 guests, and 3 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums47
Topics115,111
Posts913,473
Members42,120
Most Online940
Apr 5th, 2017
Image Posting Policy
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Hydraulic clutch pedal #1302863
Wed Mar 13 2019 03:38 AM
Wed Mar 13 2019 03:38 AM
Y
Yukon56  Offline OP
Wrench Fetcher
Joined: Aug 2017
Posts: 27
Yukon Territory
Hello,

I am going to be putting in a hydraulic clutch setup to in my 1956 chevy 3100. I'm sure someone here has solved this setup..any suggestions? I see Wilwood has a variety of options.. I would be happy to use the original clutch pedal and have a master cylinder located on the underside of the cab. Totally open to options...

Any thoughts or pictures are appreciated.


Last edited by Yukon56; Wed Mar 13 2019 03:56 AM.
Re: Hydraulic clutch pedal [Re: Yukon56] #1302872
Wed Mar 13 2019 11:46 AM
Wed Mar 13 2019 11:46 AM
G
Grigg  Offline
.
Joined: May 2005
Posts: 8,985
Lexington, VA
In my opinion if you can use a mechanical clutch linkage that should be first and best choice. Much less trouble in the long run than hydraulic.


1951 GMC 250 in the Project Journals
1948 Chevrolet 6400 - Detroit Diesel 4-53T - Roadranger 10 speed overdrive - 4 wheel disc brakes
1952 Chevrolet 3800 pickup
---All pictures---
"First, get a clear notion of what you desire to accomplish, and then in all probability you will succeed in doing it..." -Henry Maudslay-
Re: Hydraulic clutch pedal [Re: Yukon56] #1302889
Wed Mar 13 2019 02:53 PM
Wed Mar 13 2019 02:53 PM
Y
yar  Offline
Shop Shark
Joined: Mar 2010
Posts: 851
northern california
Yukon,

A hydraulic clutch gives you no feedback through the pedal. You know the clutch is engaged when the vehicle starts moving forward or the engine stalls. Mechanical linkage gives real "feel" allowing precise engagement.


Ray
Re: Hydraulic clutch pedal [Re: Yukon56] #1302891
Wed Mar 13 2019 03:04 PM
Wed Mar 13 2019 03:04 PM
Y
Yukon56  Offline OP
Wrench Fetcher
Joined: Aug 2017
Posts: 27
Yukon Territory
Thanks for the input.

I believe the NV3500 requires some sort of hydraulic clutch setup..but I could be wrong. I believe the bellhousing window is on the passenger side of the trans. I should have mentioned earlier what transmission I was going to be using.

I really do prefer the ''real feeling'' of clutch engagement...giving true feedback through the pedal.

Re: Hydraulic clutch pedal [Re: Yukon56] #1302982
Thu Mar 14 2019 05:54 AM
Thu Mar 14 2019 05:54 AM
C
coilover  Offline
Shop Shark
Joined: Apr 2005
Posts: 2,208
Plano, Tx
1960-62 Chevy trucks came from the factory with hydraulic clutches that had the TO arm and slave cylinder on the passenger side, might check it out.


Evan
Re: Hydraulic clutch pedal [Re: Yukon56] #1303006
Thu Mar 14 2019 02:41 PM
Thu Mar 14 2019 02:41 PM
H
Hotrod Lincoln  Offline
Boltergeist
Joined: Feb 2004
Posts: 18,597
Dellrose, TN
Do some homework on the diameter and stroke of the master and slave cylinders. A mismatch can result in either not enough pedal stroke to fully disengage the clutch, or possibly an extremely stiff pedal. Both cylinders, as well as the leverage of the pedal arm, have to work well together.
Jerry


The murder victim was drowned in a bathtub full of Rice Krispies and milk.
The coroner blamed the crime on a cereal killer!

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
Re: Hydraulic clutch pedal [Re: Yukon56] #1303011
Thu Mar 14 2019 02:48 PM
Thu Mar 14 2019 02:48 PM
Y
Yukon56  Offline OP
Wrench Fetcher
Joined: Aug 2017
Posts: 27
Yukon Territory
Thanks fella's

With my research is appears the factory bore for a NV3500 was 18mm or .70. I will look into the 60-62 setups, and see what they came with for a MC bore. Wilwood offers a MC with a .75 bore, but I will be sure to match the MC to the slave cylinder regardless.

This is a very similar setup to what I was thinking, check out the link if you have time and feel free to comment on any pitfalls you may see with this idea...

Cheers!

http://forum.studebakerdriversclub....pedal-for-hydraulic-clutch&styleid=2

Re: Hydraulic clutch pedal [Re: Yukon56] #1303019
Thu Mar 14 2019 03:25 PM
Thu Mar 14 2019 03:25 PM
M
mick53  Offline
Shop Shark
Joined: Apr 2016
Posts: 397
northern Indiana
I'm going with hydraulic throw out bearing also to eliminate clearance problems.


Old enough to know better, too young to resist.
Re: Hydraulic clutch pedal [Re: Yukon56] #1303022
Thu Mar 14 2019 03:43 PM
Thu Mar 14 2019 03:43 PM
H
Hotrod Lincoln  Offline
Boltergeist
Joined: Feb 2004
Posts: 18,597
Dellrose, TN
The round track cars we built with the small diameter triple disc clutch to decrease the rotating mass of the engine used a slave cylinder that was incorporated into the throwout bearing. That clutch assembly is only about 8" in diameter and it gets its torque carrying capacity by having three friction discs and two steel "floater" plates sandwiched between them. The whole assembly fits inside the bellhousing, mounting on the transmission bearing retainer. It's a neat, compact setup that should also work well on a street machine if the hydraulic throwout bearing is used with a conventional clutch. The triple disc clutch is sort of an on/off situation that doesn't respond well to an effort to make a smooth takeoff from a stop!
Jerry


The murder victim was drowned in a bathtub full of Rice Krispies and milk.
The coroner blamed the crime on a cereal killer!

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
Re: Hydraulic clutch pedal [Re: Yukon56] #1303025
Thu Mar 14 2019 04:07 PM
Thu Mar 14 2019 04:07 PM
H
Hotrod Lincoln  Offline
Boltergeist
Joined: Feb 2004
Posts: 18,597
Dellrose, TN
Search Ebay for "hydraulic throwout bearing". There's dozens of them listed, some at very reasonable prices.
Jerry


The murder victim was drowned in a bathtub full of Rice Krispies and milk.
The coroner blamed the crime on a cereal killer!

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
Page 1 of 2 1 2

Moderated by  KCMongo 

Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 7.6.1.1