The Stovebolt.com Forums Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Big Thanks!

Big THANKS to

MONGO
for hosting
the weekend event.



Read all about it.


Stovebolt Site Search
'
Oh Lord, I just gotta find it....

A pdf guide to help you search the Site


Old Truck Calendars
Months of truck photos!
Nothing like an old truck calendar

Stovebolt Calendars

Check for details!


Who's Online Now
14 members (Chiana River, 7045george, 66flea, Cosmo, dgrinnan, 4 invisible), 133 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums60
Topics124,936
Posts1,008,317
Members45,097
Most Online1,229
Jan 21st, 2020
Image Posting Policy
Previous Thread
Next Thread
Print Thread
Change a 1954 Hydraulic lifter engine to solids, is it possible ?
#1181810 Fri Sep 09 2016 03:53 PM
Joined: Jul 2007
Posts: 530
'
Shop Shark
An internet friend of mine has a 1954 Chevy 235 engine

from a passenger car with power glide. The engine block

# is 3835911 with a date casting of D284 , which

translates to : April 28, 1954.

His plan is to have the hydraulic camshaft reground to

1954 solid lifter specs & then run solid lifters.

Is this possible ?

Need some in depth opinions of his plan.

Thank You,
George
'54 3600


1954 3600
Re: Change a 1954 Hydraulic lifter engine to solids, is it possible ?
'54 3600 #1181816 Fri Sep 09 2016 04:17 PM
Joined: Feb 2004
Posts: 23,018
H
'Bolter
Why not just buy a new cam with the appropriate lifters? Regrinding a cam reduces the diameter of the base circle of the lobes and makes it difficult to get a good adjustment because the adjusting screws on the rocker arms have to be turned in too far. I've seen some rockers with the lock nuts on the underside to accomplish a deep enough adjustment. Changing the grind from hydraulic to solid would involve taking a lot of material off the cam lobes.

While he's at it, does he intend to install acetylene gas headlights, a magneto, and a hand crank for starting? Might as well take a giant leap backwards with the rest of the vehicle!
Jerry



The murder victim was drowned in a bathtub full of Rice Krispies and milk.
The coroner blamed the crime on a cereal killer!

Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
Re: Change a 1954 Hydraulic lifter engine to solids, is it possible ?
'54 3600 #1181879 Fri Sep 09 2016 09:59 PM
Joined: Jan 2009
Posts: 1,693
P
Shop Shark
It will be cheaper just to buy a new cam and a set of lifters,when I built my 235 power glide the cam was junk and I put in a new hyd cam and lifters.

Pete

Re: Change a 1954 Hydraulic lifter engine to solids, is it possible ?
'54 3600 #1181882 Fri Sep 09 2016 10:21 PM
Joined: Jan 2001
Posts: 1,562
ODSS President
Why? I have over 100 thousand miles on a rebuilt '56 hydraulic.


Cosmo

"...my good horse Rocinante ('49 Chevy Half Ton), mine eternal and inseparable companion in all my journeys and courses." ...Don Quixote, Cervantes

"If you come to a fork in the road, take it."...Yogi Berra

Moderated by  Woogeroo 

Link Copied to Clipboard
Home | FAQ | Forum | Swap Meet | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 7.7.4