I am reading on the back of my can of stripper that you can clean it off with a solvent. What type of solvent are we talking here? Do I just wet a rag with solvent and wipe off? I have been using the hose to spray it off with water for small pieces I can get into my back yard but I dont have an easy way to get the cab in a good place to rinse it.
I2D: Buddy just tell your wife its cheaper than a lap dance .
Lay plastic around cab and start scraping or use an old blanket wash truck lightly. I use a product called Will Bond, (most paint stores) and wipe. Going thru the same thing right at the moment just taking a small area at a time. Using scraper and Orbital sander working pretty good so far.
I used safety razor blade for stripping the large areas, and a wire brush on the grinder for the harder areas to reach.. just make sure you are well covered up using a wire brush he paint stripper really stings....