|
|
|
Paint and Body Shop
|
|
I ran across this site run by body shop owners. They welcome guests and have recently started a separate forum section on restoration projects. They have fun teasing one another about their projects. They use a variety of paint lines and products. Ve
|
|
Panels 'N Burbs
|
|
I have the opportunity to buy a complete Napco 4x4 Suburban, but don't know if the hubs and transfer case have enough value to make the purchase worthwhile. Any thoughts?
|
|
Interiors
|
|
I am looking for advice on what most people use to prep and paint the floor of their trucks. Doesn't need to be a show winner finish, but want it to be close to original without paying a lot. Do most sandblast the metal, or just rough it up, prime
|
|
The Engine & Driveline Shop
|
|
I purchased a fuel line for my 59 apache. In the classic chevy parts book it did not distinguish between 3/4 ton (my pickup) and a 1/2 ton. The shipping paper says it is for a 1/2 ton. When I match it up to the old line, which is hard to do since
|
|
'60-'66 Trucks
|
|
Would really like to take off rear drums to replace shoes on our 63 C20 fleetside. It has very sticky-outy hubs which have x8 bolts at the end and something in the middle that looks as though it might twist. Wheel is 8-lug, rear ends looks weapons-gr
|
|
The Engine & Driveline Shop
|
|
I have a 261 I'm building and I was wondering what the HP and torque difference would be between the stock 261 head and a 848 head, neither head milled. I'm using a Bull dog cam and the block is bored +.060. I'm going to use Langdon's holley 2 barels
|
|
The Electrical Bay
|
|
I just installed cab lights on my 64, C30. As an electrical "dummy", I'm not sure if I should wire them through a relay, or just patch them into an existing wire under the dash that feeds the lights. There are five of them, and they are not
|
|
eBay and Craiglists Links
|
|
1955-59 Chevy/GMC Suburban/Panel Truck Rear Valance
|
|
eBay and Craiglists Links
|
|
Another '56 GMC on ebay, just one picture tho. Hope to see more, all the chrome on the front looks great. '56 GMC Fire Truck
|
|
'60-'66 Trucks
|
|
Who can tell me the setup of the deluxe horn ring (p/n 763178) for the 60-65 trucks? The stock wheel has a brass cup that is too deep to use with the deluxe steering wheel. Is a cup used at all, or does the plastic ring go against the wheel by itself
|
|
The Stovebolt Volunteer Fire Department
|
|
A nice looking 1956 LCF GMC in the ebay-craigs list forum!
|
|
Paint and Body Shop
|
|
I have noticed many different paint schemes on 1967 / 1968 grills. I have a custom model truck. The face is body paint. What is the correct color for the metal that shows behind the face?
|
|
The Engine & Driveline Shop
|
|
I am trying to find out if the 60' six cylinder engine has specific bolt holes in the front of the engine in order to mount it up in my 60 apache. or are there more peices I need other than the correct engine and the horseshoe perch and bell housing.
|
|
'60-'66 Trucks
|
|
I have a 62 motor six cylinder for my 60 apache but it does not have the holes in the front of it for the front horseshoe mount is there a specific block for this or are there peices missing that I need for the mounting of the motor????
|
|
eBay and Craiglists Links
|
|
http://chicago.craigslist.org/nwi/pts/1462249086.html
|
|
eBay and Craiglists Links
|
|
http://inlandempire.craigslist.org/pts/1466635362.html
|
|
'60-'66 Trucks
|
|
Has anyone done or heard of anybody installing a GEN III 4.8/5.3/5.7/6.0 in a "61" K series truck or Burb ? If so I'm looking for a better fit on the headers .I think Sanderson's S10 LS1 header will be the ticket but a little concerned in
|
|
Freebies
|
|
1956 3200 frame (long 1/2 but same as 3/4 ton) -- has factory V8 mounts Frame is titled and registered. Pick up only. email: 1956 at OLDTRUCK dot NET
|
|
eBay and Craiglists Links
|
|
No affiliation. Just thought someone here may be interested. Best, Dan http://inlandempire.craigslist.org/cto/1442386786.html
|
|
Modern GM and Non-GM
|
|
67 international pickup engine 6cyl,3speed trans, and rear. Low mileage on truck. Call 240-372-2022 Maryland
|
|
New Stuff and Announcements
|
|
I tried the link to the vintage truck mag for 19.95 but it shows 29.95. I tried putting it the discount key code and get a error. What am I doing wrong ?
|
|
eBay and Craiglists Links
|
|
In California, on ebay. 1965 Chev. fuel truck
|
|
General Truck Talk
|
|
I have a 1967 C-20 (complete) and a 1969 4x4 frame. My cab is shot and I don't want to mess around with repairing (welding in) new floors. My question is what (year and model) cabs can swap in with little headache? Nick
|
|
New Stuff and Announcements
|
|
hey i left for a min, and where did the section where guys talked about there "daily drivers" ol chevys? i loved reading about the guys who really use there old trucks everyday and daily transportation PLEASE BRING IT BACK
|
|
Modern GM and Non-GM
|
|
looking for front susp rebuild kit for 67 Int. pickup
|
